IBM 5697-VM3 manual Allocate Resources for Installing Tivoli ADSM for VM

6.3 Allocate Resources for Installing Tivoli ADSM for VM

Use the planning information in the 5654A09A PLANINFO file, created in the PLAN step, to:

Create the 5654A09A user directory for minidisk install

OR

Create the 5654A09A user directory for SFS install.

6.3.1Installing Tivoli ADSM for VM on Minidisk

1Obtain the user directory from the 5654A09A PLANINFO file.

Note: The user directory entry is located in the resource section of the PLANINFO file, at the bottom; these entries will contain all of the links and privilege classes necessary for the 5654A09A user ID. Use the directory entry found in PLANINFO as a model for defining 5654A09A.

2Add the MDISK statements to the directory entry for 5654A09A. Use Figure 8 on page 11 to obtain the minidisk requirements.

3Change the password for 5654A09A from xxxxxxxx to a valid password, in accordance with your security guidelines.

4Add the 5654A09A directory definition to the system directory.

Note: Updates to the CP system directory can be done only from authorized user IDs. If you or any of your user IDs do not have the proper authority, then seek help from the person who has the proper authority.

5Place the new directory definition on-line using VM/Directory Maintenance (DIRMAINT) or an equivalent CP directory maintenance method.

Note

All minidisks for the 5654A09A user ID must be formatted before installing

Tivoli ADSM for VM.

6.3.2Installing Tivoli ADSM for VM in SFS Directories

1Obtain the user directory from the 5654A09A PLANINFO file.

Note: The user directory entry is located in the resource section of the PLANINFO file, at the bottom; these entries will contain all of the links and privilege classes necessary for the 5654A09A user ID. Use the directory entry found in PLANINFO as a model for defining 5654A09A

20Tivoli ADSM for VM Program Directory