IBM 5697-VM3 manual vmfppf 5654A09A, vmfbld ppf 5654A09A ADSM ADSMSFS status

Note

If the $PPF files have been serviced you will get the following prompt:

VMFBLD2185R The following source product parameter files have been serviced:

VMFBLD2185R 5654A

VMFBLD2185R When source product parameter files are serviced, all product parameter files built from them must be recompiled using VMFPPF before VMFBLD can be run.

VMFBLD2185R Enter zero (

parameter files built to your A-disk and exit VMFBLD so you can recompile your product parameter files with VMFPPF.

VMFBLD2185R Enter one (1) to continue only if you have already recompiled your product parameter files with VMFPPF.

0	Enter a 0 and complete the following steps
	before you continue.
VMFBLD2188I Building 5654A
on 191 (A) from level $PFnnnnn
vmfppf 5654A09A *	Note: If you've created your own PPF
	override then use your PPF name instead of
	5654A09A.
	Use ADSM for installing on minidisks or
	ADSMSFS for installing in Shared File System
	directories.

copyfile 5654A09A $PPF a = = d (olddate replace erase 5654A09A $PPF a

Note: Do not use your own PPF name in place of 5654A09A for the COPYFILE and ERASE commands.

vmfbld ppf 5654A09A {ADSM ADSMSFS} (status

1	Re-issue VMFBLD to complete updating the
	build status table.

Use ADSM for installing on minidisks or ADSMSFS for installing in Shared File System directories. When you receive the prompt that was previously displayed, enter a 1 to continue.

Service Instructions 33