IBM GC09-2830-00 manual Performing the Installation

__ 3. For Windows NT, any user account that does not belong to the guests group. This user account will be used to perform the installation.

Performing the Installation

To install your DB2 product, perform the following steps:

Step 1. Log on to the system with the user account that you created to perform the installation.

Step 2. Shut down any other programs so that the setup program can update ®les as required.

Step 3. Insert the CD-ROM into the drive. The auto-run feature automatically starts the setup program. The setup program will determine the system language, and launch the setup program for that language. If you want to run the setup program in a different language, or the setup program failed to auto-start, see the tip that follows.

To manually invoke the setup program, perform the following steps:

a.Click on Start and select the Run option.

b.In the Open ®eld, enter the following command: x:\setup /i language

where:

vx: represents your CD-ROM drive

vlanguage represents the country code for your language (for example, EN for English). Table 8 on page 159 lists the code for each available language.

c.Click on OK.

32Quick Beginnings