IBM GC09-2830-00 manual Quick Beginnings

c.In the Partner LU alias ®eld, type in the partner LU name („2…) from the worksheet (NYM2DB2).

d.If you are con®guring Communications Server for SNA Clients, in the Fully-quali®ed CP name ®elds, type in the network ID („3…) and the adjacent control point SSCP name („4…) (SPIFNET.NYX).

Leave the other ®elds blank.

e.Click on OK.

Step 6. Con®gure Modes

a.In the Con®guration options ®eld, select Con®gure modes, then click on the New button. The De®ne a mode window appears.

b.In the Mode name ®eld („6…), type in the mode name (IBMRDB).

c.Click on the Advanced tab and ensure that the Class of Service Name is set to #CONNECT.

Accept the defaults for the other ®elds.

d.Click on OK.

Step 7. Con®gure Local LU 6.2

a.In the Con®guration options ®eld, select Con®gure local LU 6.2, then click on the New button. The De®ne a local LU 6.2 window appears.

b.In the Local LU name ®eld, type in the name („11…) from the worksheet (NYX1GW01).

c.Type in a value for the LU session limit ®eld. The default, 0, speci®es the maximum allowed value.

Accept the defaults for the other ®elds.

d.Click on OK.

Step 8. Con®gure CPI-C Side Information

a.In the Con®guration options ®eld, select Con®gure CPI-C side information, then click on the New button. The De®ne CPI-C side information window appears.

b.In the Symbolic destination name ®eld, type in the name („16…) from the worksheet (DB2CPIC).

c.In the Mode name ®eld, type in the name („15…) from the worksheet (IBMRDB).

d.Click on the radio button beside Use Partner LU alias and select

aPartner LU alias.

e.Specify the TP name. In the TP name ®eld:

v To specify a non-service TP, in the TP name ®eld, type in the name of the non-service TP, for example DB2DRDA, and ensure that there is no check mark in the Service TP check box.

74Quick Beginnings