IBM GC09-2830-00 manual Sample VTAM Log Mode Denition for DB2

----+---- 1---- +---- 2---- +---- 3---- +---- 4---- +---- 5---- +---- 6---- +---- 7--

SWITCHED MAJOR NODE DEFINITION FOR PU NYX1 and

INDEPENDENT LU NYX1GW01

LOC300	VBUILD TYPE=LOCAL
NYX1	ADDR=01,IDBLK=071,IDNUM=27509,ANS=CONT,DISCNT=NO,	X
	IRETRY=YES,ISTATUS=ACTIVE,MAXDATA=4302,MAXOUT=7,	X
	MAXPATH=1,PUTYPE=2,SECNET=NO,MODETAB=RDBMODES	X
	SSCPFM=USSSCS,PACING=0,VPACING=2
NYX1GW01	LOCADDR=000,MODETAB=RDBMODES,DLOGMODE=IBMRDB
OTHERLU	LOCADDR=002

Figure 11. Sample VTAM Switched Major Node De®nition for DB2 Connect

Sample VTAM Log Mode De®nition for DB2

Figure 12 on page 44 shows the sample VTAM logon mode table de®nition for the IBMRDB and SNASVCMG modes. Note that this example speci®es a 4K

RUSIZE, which may not be suitable for your environment (for example, if you are using Ethernet, which has a maximum Frame Size of 1536 bytes). Your VTAM Administrator should check these values and advise you which mode table entry name and RUSIZE to specify for DB2 Connect.

Chapter 5. Con®guring Host and AS/400 Databases for DB2 Connect 43