IBM GC09-2830-00 manual a. In the Conguration options eld, select Congure devices

f.Click on OK.

Step 2. Con®gure Devices

a.In the Con®guration options ®eld, select Con®gure devices.

b.Ensure that in the DLCs ®eld, the appropriate DLC is highlighted. For example, LAN.

c.Click on the New push button. The appropriate window appears with default values displayed. For example, the De®ne a LAN device window.

d.Click on OK to accept the default values.

Step 3. Con®gure the Gateway

a.In the Con®guration options ®eld, select Con®gure the Gateway, then click on the New push button. The De®ne Gateway window appears.

b.Click on the SNA Clients tab.

c.Ensure that there is a check mark in the Enable SNA API Client Services check box.

d.Click on OK to accept the default values.

Step 4. Con®gure Connections

a.In the Con®guration options ®eld, select Con®gure connections.

b.Ensure that in the DLCs ®eld, LAN is highlighted.

c.Click on the New push button. The De®ne a LAN connection window appears.

d.On the Basic tab panel:

1)In the Link station name ®eld, type in the name („7…) from the worksheet (LINKHOST).

2)In the Destination address ®eld, type in the address („8…) from the worksheet (400009451902).

e.On the Security tab panel:

1)In the Adjacent CP name ®elds, type in the network ID („3…) and the Control Point name („4…) (SPIFNET.NYX).

2)In the Adjacent CP type ®eld, select the appropriate CP type (eg. Back-level LEN).

3)Ensure that TG number is set to 0 (the default).

4)Click on OK.

Step 5. Con®gure Partner LU 6.2

a.In the Con®guration options ®eld, select Con®gure partner LU, then click on the New button. The De®ne a partner LU 6.2 window appears.

b.In the Partner LU name ®elds, type in the network ID („3…) and the partner LU name („2…) (SPIFNET.NYM2DB2).

Chapter 7. Con®guring APPC Communications on the DB2 Connect Workstation 73