IBM GC09-2830-00 manual Ordering the Printed Books

book, simply run it as you would run any other executable program. The result from this step is a printable PostScript ®le with a ®le extension of

.ps.

3.Ensure that your default printer is a PostScript printer capable of printing Level 1 (or equivalent) ®les.

4.Enter the following command from a command line:

print filename.ps

On UNIX-based platforms:

1.Mount the CD-ROM. Refer to your Quick Beginnings manual for the procedures to mount the CD-ROM.

2.Change to /cdrom/doc/%L/ps directory on the CD-ROM, where /cdrom is the mount point of the CD-ROM and %L is the name of the desired locale.

The manuals will be installed in the previously-mentioned directory with ®le names ending with .ps.Z.

3.Decompress and print the manual you require using the following command:

vFor AIX:

zcat filename qprt -P PSPrinter_queue

vFor HP-UX, Solaris, or SCO UnixWare 7: zcat filename lp -d PSPrinter_queue

vFor Linux:

zcat filename lpr -P PSPrinter_queue

vFor Silicon Graphics IRIX:

zcat < filename lp -d PSPrinter_queue

where ®lename is the full path name and extension of the compressed PostScript ®le and PSprinter_queue is the name of the PostScript printer queue.

For example, to print the English version of DB2 for UNIX Quick

Beginnings on AIX, you can use the following command:

zcat /cdrom/doc/en/ps/db2ixe60.ps.Z qprt -P ps1

Ordering the Printed Books

You can order the printed DB2 manuals either as a set or individually. There

are three sets of books available. The form number for the entire set of DB2 books is SBOF-8926-00. The form number for the books listed under the heading ²Cross-Platform Books² is SBOF-8924-00.

Appendix D. How the DB2 Library Is Structured 157