IBM GC09-2830-00 manual i. Select the System Identication tab

g.Select the Address tab.

h.Fill in the Remote Network Address ®eld („8…). Accept the default numbers in the other ®elds.

i.Select the System Identi®cation tab.

j.Enter the following information:

1)For the Local Node Name, add the Network ID („9…), the Local PU Name („10…), and the Local Node ID („1… plus „14…). Accept the XID Type default.

2)For the Remote Node Name, add the NETID („1…) and the Control Point Name („4…). Accept the other defaults

k.Click on OK.

Step 5. De®ne a local LU

a.Right-click on the SNA Service icon and select the Insert->APPC->Local Lu option. The Local APPC LU Properties

Chapter 7. Con®guring APPC Communications on the DB2 Connect Workstation 83