IBM GC09-2830-00 manual Software Registration

For information on errors encountered during installation, see the l1.log and l2.log ®les. These ®les store general information and

error messages resulting from installation and uninstall activities. By default, these ®les are located in the x:\db2log directory; where x:

represents the drive on which your operating system is installed.

For more information, refer to the Troubleshooting Guide.

To set up connections to host or AS/400 database servers, go to one of the following sections:

vªChapter 6. Con®guring DB2 Connect to Host or AS/400 Communications Using the CCAº on page 57

vªChapter 7. Con®guring APPC Communications on the DB2 Connect Workstationº on page 67

Software Registration

The Software Registration tool is used to register IBM Software with IBM and update IBM's Software Customer Pro®les. A customer pro®le contains identi®cation and demographic information about the users of each IBM software product. The software registration tool contains information and instructions on how to register IBM software by modem, telephone, Internet, FAX, or postal service. To register your software with IBM, perform the following steps:

Step 1. Start the IBM Software Registration tool. For more information, see ªStarting the Software Registration Toolº on page 133.

Step 2. Enter the appropriate information and complete the IBM Software Registration Smart Guide. Click on the Help push button if you need assistance.

Chapter 3. Installing DB2 Connect on OS/2 29