IBM M110 3.0 Usage

3.0 Usage

All the parameters of the terminal are accessible from on-screen menus,

once you have powered up the unit.

To access the menu and configuration parameters, press the following

keys simultaneously.

ALT + Esc

(Please note: If the system key has been changed to Scroll Lock, then you

must use Scroll Lock + Esc to access the setup menu)

The main menu will appear as follows:

v You can navigate around the menus with the up and down arrow keys,

then press ENTER to make a selection.

USA-0212-000003

Main Menu

User Environment

Port Configuration

Sessions

Network Configuration

Host Table

Factory Configuration

Save And Exit

Exit Without Saving

Enter: Select Arrows: Next Item F4: Toggle Color

Contents

Main SpotLine M110 User Guide Page SpotLine M110 User Guide Table of Contents Page 1.0 Introduction Page 1.0 Specifications Page 2.0 Getting Started 3.1 Installation 3.2 Setup 3.0 Usage 4.1 Configuration Setup 4.1.1 User Environment Page Page 4.1.2 Port Configuration Page Page 4.1.3 Sessions Page Page 4.1.4 Network Parameters Page Page Page 4.1.5 Host Name 4.1.8 Exit without Saving 4.2 Reverse Telnet Page 4.3 Remote TTY for Unix Systems Page 4.4 Reversal of the LEDs for Num. Lock and Caps Lock 4.5 Purge the Printer Buffer 4.6 Function Key 4.6.1 Function Key Reset 4.6.2 Programming function keys (F1- F24) Page 4.7 Multiscreen Session Switching 4.7.1 How to declare SCO mscreen for SpotLine Terminals 4.8 Telnet Session Page 4.0 Software Configuration 5.1 SCO XENIX/Unix 5.1.1 Use as a Telnet Session LAN Terminal Page 5.1.3 Use as a Serial Terminal 5.2 Use with IBMs AIX Unix 5.2.1 Use as a Serial AIX Terminal Device 5.2.2 Use as a Telnet terminal Page 5.3 Other Unix Versions 5.3.1 Use as a Serial Terminal 5.4 Use with Other Operating Systems 5.0 Cabling 6.1 Terminal to Host Cabling 6.2 Serial Printer Cabling 6.0 Emulation 7.1 General 7.2 Keyboard Control Characters Page 7.3 Screen Control Parameters Page Page 7.5 Additional ESC Commands Page 7.0 Warranty