iCEBOX pmn manual Turning on the iCEBOX for the First Time Viewing Welcome CD, Storage of DVD/CDs

Setting Up Your iCEBOX

Turning on the iCEBOX for the First Time

Viewing the

Welcome CD

Tips on Inserting and Handling DVD/CDs

The first time the iCEBOX is plugged in and anytime it has been unplugged and plugged back in, the unit will spend a few seconds initializing. During this period, the buttons on the front panel, remote control and keyboard will not function. When initialization is concluded, the unit can be turned on and all buttons will function normally.

Autoprogramming TV Channels

You may set up your TV for either cable or antenna reception and edit the list of channels available for viewing by using on-screen menus. By selecting AUTOSCAN CHANNELS from the TV On-screen Menu the iCEBOX will locate and tune all available TV channels. More information about autoprogramming TV channels can be found in “TV Setup Menu” beginning on page 13.

The Welcome Video CD is an informative and entertaining guide on how to set up and use your iCEBOX. To view the Video CD:

1.Turn the iCEBOX on. Press EJECT (on the front of the unit) to open the tray. Insert the Welcome CD with the label facing up.

2.Press PLAY on the monitor, or press DVD on the remote control or the keyboard.

The Welcome CD will begin to play automatically. If you wish, you may press NEXT to skip the introductory material and go directly to the main menu.

3.At the main menu, press the numbered key on the remote control or keyboard that corresponds to the menu number of the program you want to watch.

While viewing a disc, you may switch to any other mode by pressing the appropriate button (TV, NET, MON) on the remote control or keyboard. The disc will pause in place until you return to DVD Mode.

•When inserting a disc in the tray, make sure that the disc is positioned in the center of the tray with the printed side facing up.

•If the disc is positioned correctly when the tray closes, the screen will indicate which type of disc has been inserted.

•Make sure the disc is kept clean and free of oils, dirt and moisture. If necessary, wash the disc with a mild solution of soap and warm water and dry thoroughly with a lint free cloth. Do not apply solvents such as benzene or paint thinner. Do not use anti-static agents. Do not scrub the disc with any abrasive material.

•Keep DVD/CDs away from heat and direct sunlight.

•Store DVD/CDs properly when not in use.

Storage of DVD/CDs

•After play, remove the disc from the tray.

•To prevent damage, be sure to store discs in their case.

•Do not store discs in areas of direct sunlight, high heat or humidity, near heating vents, or dusty areas.

8 ©iCEBOX, LLC, September 2001