Manuals / Icom / Household Appliance / Home Security System

Icom I706MKTMG, IC-706MKIIG Quick set mode items, Q1 RF POWER all modes, Q2 CW PITCH CW only

Models: I706MKTMG IC-706MKIIG

1 75

Download 75 pages 32.92 Kb

Page 51

■Quick set mode items

SET MODE 7

■Quick set mode items

Q1 RF POWER (all modes)

This item adjusts the RF output power. The RF out- put power can be adjusted from L, 1 to 9 and H for indication, however, it can be adjusted continuously.

The default is H (maximum power).

Note that while adjusting the output power, the power meter is displayed automatically.

Q2 MIC GAIN (SSB/AM/FM only)

The default is 5.

This item adjusts microphone gain from 1 to 10 for indication, however, it can be adjusted continuously.

Note that while adjusting mic gain, the ALC meter is displayed automatically.

Q2 CW PITCH (CW only)

This item adjusts the CW pitch. CW pitch is adjustable from 300 to 900 Hz in 10 Hz steps.

CW

The default is 600 Hz.

Q2 RTTY TONE (RTTY only)

This item selects the RTTY tone. RTTY tone is tog- gled between 1275, 1615 and 2125 Hz.

RTTY

The default is 2125 Hz.

	Q3 VOX DELAY (SSB/AM/FM only)
	This item adjusts the VOX (Voice-activated Transmit)	USB
		USB
	delay time. The delay time can be adjusted from 0 to	The default is 1.0 seconds.
	delay time. The delay time can be adjusted from 0 to
	2 sec. in 0.1 sec. units.


	Q3 BK-IN DELAY (CW only)
	This item adjusts break-in delay time for CW semi	CW
	This item adjusts break-in delay time for CW semi	The default is 7.5 dots.
	break-in operation. The delay time is selectable from	The default is 7.5 dots.
	break-in operation. The delay time is selectable from
	2.0 to 13.0 (dots).

Q3 RTTY SHIFT (RTTY only)

RTTY

This item adjusts the RTTY shift. There are 3 selec-The default is 170 Hz. table values: 170, 200 and 425 Hz.

Q4 VOX GAIN (SSB/AM/FM only)

	This item adjusts the VOX gain for the VOX (voice	USB
		The default is 5.
	activated transmit) function.

Q4 RTTY KEYING (RTTY only)

This item adjusts the RTTY keying. Normal or reverse keying can be selected.

RTTY

The default is “n,” normal.

Normal	: key open=mark
Reverse	: key open=space

48

Image 51

Icom I706MKTMG, IC-706MKIIG Quick set mode items, Q1 RF POWER all modes, Q2 CW PITCH CW only, Q2 RTTY TONE RTTY only

Contents

i706MKG INSTRUCTION MANUALHF/VHF/UHF ALL MODE TRANSCEIVER For U.S.A. only PRECAUTIONSEXPLICIT DEFINITIONS RWARNING HIGH VOLTAGE! NEVERAccessories included with the IC-706MKIIG TABLE OF CONTENTS2 INSTALLATION AND CONNECTIONS 10 OPTIONAL INSTALLATIONS/SETTINGSo UP/DOWN BAND SWITCHES Y/ZBAND q POWER SWITCH POWER p.t TUNING STEP SWITCH TS pgs. 17, y MODE SWITCH MODE p6RIT/SUB DIAL SWITCH RIT/SUB p. 2LOCK SWITCH LOCK3DISPLAY SWITCH DISP p 5MENU SWITCH MENU p.Function switches S1 MW MPW MPR Rear and side panels r ACCESSORY SOCKET ACC p.y CI-VREMOTE CONTROL JACK REMOTE o DC POWER SOCKET DC13.8V p.➄ AF When connecting the ACC conversion cable OPC-599TECHNICAL INFORMATION ACC SOCKETr SPLIT INDICATOR q NARROW/WIDE FILTER INDICATORSw MODE INDICATORS Show the operating mode e PROGRAMMABLE/1 MHz TUNING STEP INDICATORS•MICROPHONE CONNECTOR ➊UP/DOWN SWITCHES UP/DN➋LOCK SWITCH LOCK ➌PTT SWITCH PTTGrounding 2 INSTALLATION AND CONNECTIONSPL-259CONNECTOR INSTALLATION EXAMPLE UnpackingDFront panel separation InstallationDSingle body mounting DStandMICROPHONE p. Required connectionsHF/50 MHz ANTENNA 2 m ANTENNAREMOTE p. HEADPHONESSWITCH Advanced connectionsDC POWER SUPPLY Power supply connectionsCONNECTING THE PS-125 / PS-85DC POWER SUPPLY CONNECTING A NON-ICOMExternal antenna tuners and linear ampliﬁer CONNECTING THE AH-4CONNECTING THE AT-180 CONNECTING THE IC-PW1POWER 3 FREQUENCY SETTINGWhen ﬁrst applying power CPU resetting Initial settingsEXAMPLE VFO description•The differences between VFO and memory mode VFO MODEM1 SPL A/B A=B Frequency setting•Programmable tuning steps •1 Hz and 10 Hz tuning steps•Sub dial function •1 MHz quick tuning stepTS SWITCH FLOW CHART Rotate DIAL•Quick band change function Mode selectionS3 7 144 S3 7 GENDRIT function RECEIVE AND TRANSMITFunctions for receive DIF shift functionDPeak meter hold DNoise blankerDAGC time constant DPreamp and attenuatorPage FILTER ON/OFF FILTER PRESETTINGOptional ﬁlter installation and selection tables DOptional ﬁlter selectionS4 ANF NR NRL S4 LEVEL 8 NRL DANF Automatic Notch Filter functionDNR Noise Reduction function S4 ANF NR NRL•Available power DOutput power and mic gainQ1 RF POWER •Setting output powerDVOX operation DSpeech compressorFor the 50 MHz band MANUAL TUNINGTUNER OPERATION •For the HF band Through inhibit HF bands only•PTT tune function RWARNING HIGH VOLTAGEDOptional AH-4 AUTOMATIC ANTENNA TUNER operation AH-4operationPROGRAMMING SPLIT SHIFT FREQUENCY Split frequency operationDQuick split function 16 SPL OFFSETQ6 RPTR TONE DRepeater operation17 DUP 144M 12 QUICK SPLITQ8 T-SQLSCN Tone squelch operationTone scan operation Q7 TONE SQLFREQUENCY One-touchrepeater functionAuto repeater function M1 SPL A/B A=BDCW operation Q3 BK-INDELAYFunctions for CW DConnections for CWDCW reverse mode •Setting the electronic keyerKEYING WEIGHT EXAMPLE: morse code “K” DCW pitch controlFunctions for RTTY DConnections for RTTY FSKDConnections for AFSK Q2 RTTY TONE PRESETTING FOR RTTY Tone frequencyDRTTY FSK operation DRTTY AFSK operationDData socket When transmission is not successful even thoughPacket operation DConnections for packetA Spot measurement DMeasuring SWRM3 FIL NB G2 50kMemory clearing 5 MEMORY AND SCAN OPERATIONMemory channels Memory channel selectionMemory/call programming • Programming in VFO mode•Programming in memory mode Memory names Frequency transferring•Calling up a frequency from a memo pad Memo pads•Scan resume ON/OFF Scan typesPreparation •ChannelsPriority watch Programmed scan operationMemory scan operation Select memory scan operationCT-17 6 REMOTE JACK CI-VINFORMATIONDCI-Vconnection example DData formatCn Sc COMMAND TABLEREMOTE JACK CI-VINFORMATION DescriptionDQuick set mode operation RF POWER7 SET MODE GeneralQuick set mode items Q1 RF POWER all modesQ3 BK-INDELAY CW only Q3 VOX DELAY SSB/AM/FM onlyQ6 RATIO CW only Q4 CW PADDLE CW onlyQ5 KEY SPEED CW only Q6 CARRIER Frq SSB onlyQ8 RPTR-TSCN repeater tone scan 5 KEY LIGHT key/switch backlightingInitial set mode items 1 MODE SELECT all modes9 OPT. FIL 1 optional ﬁlter 6AUTO OFF auto power OFF7 RF/SQL SQL/AUTO/RF•SQL 8SUBDIAL Subdial function15DUP HF duplex offset 12QUICK SPLIT quick split function13SPLIT LOCK split lock 14SPL OFFSET split offset22SCAN SPEED scan speed 26PWR ON CHK Power on check20AUTO RPTR auto repeater 21SCAN RESUME scan resume30VSEND SEL ACC socket output 27A-TUNESTRT auto tuner start28PTT TUNE PTT tune function 29 9600 MODE Data socket speed36CI-VTRN CI-Vtransceive 33S-LVLSPCH S-levelspeech34CI-VADDRES CI-Vaddress 35CI-VBAUD CI-Vdata rateCleaning MAINTENANCEFuse replacement Memory backupSOLUTION 9 TROUBLESHOOTINGPOWER SUPPLY RECEIVE PROBLEMSOLUTION TRANSMIT DISPLAY SCANTROUBLESHOOTING PROBLEM10 OPTIONAL INSTALLATIONS/SETTINGS Opening the transceiver caseUT-102 VOICE SYNTHESIZER UNIT CR-282 HIGH-STABILITYCRYSTAL UNIT IF ﬁltersMB-72 CARRYING HANDLE DInstallationDOperation UT-106 DSP RECEIVER UNIT•AT-180inside top cover AT-180internal switch description•Connector information for ACC2 socket S2 S1 D C BA11 INTERNAL VIEWS DTop viewDBottom view OPTIONS 12 OPTIONS SPECIFICATIONS Indication + power ON14 MENU GUIDE Initial set modeRTTY mode Quick set modeSSB/AM/FM mode CW mode1-1-32Kamiminami, Hirano-ku,Osaka 547-0003,Japan Count on usDECLARATION OF CONFORMITY •About DC power supplyABOUT CE •Version and frequency coverageEIRP Clearance heights by frequency band INSTALLATION NOTES• Typical amateur radio installation Forward clearance, EIRP by frequency bandINSTALLATION NOTE ABOUT SP-7EXTERNAL SPEAKERCount on us