Icom IC-706MKIIG, I706MKTMG instruction manual Options

12 OPTIONS

SP-7EXTERNAL SPEAKER

Compact speaker for base station opera- tion. Height can be adjusted for your con- venience.

•Input impedance: 8 Ω

•Max. input power: 5 W

SP-10EXTERNAL SPEAKER SP-12EXTERNAL SPEAKER

SP-12 SP-10

External speakers suitable for mobile oper- ation.

SP-12: Slim-type; 8 Ω/3 W

SP-10: Compact-type; 4 Ω/5 W

SP-20EXTERNAL SPEAKER

Equipped with 4 types of audio filters, a headphone jack and can be connected to 2 transceivers.

•Input impedance: 8 Ω

•Max. input power: 5 W

SP-21EXTERNAL SPEAKER

External speaker designed for base station operation.

•Input impedance: 8 Ω

•Max. input power: 5 W

CT-16SATELLITE INTERFACE UNIT

Easy tuning when connecting another Icom VHF transceiver for instant satellite com- munications.

CT-17CI-V LEVEL CONVERTER UNIT

For remote transceiver control using a per- sonal computer equipped with an RS-232C port. You can change frequencies, operat- ing mode, memory channels, etc., via your computer.

OPC-581SEPARATION CABLE OPC-587SEPARATION CABLE

Provide front panel detached operation for mobile installations or compact transceiver operation.

•OPC-581: 3.5 m (11.5 ft)

•OPC-587: 5 m (16.4 ft)

OPC-589MICROPHONE ADAPTER CABLE

Conversion between 8-pin modular and 8- pin metal connector for using a desktop microphone with the IC-706MKIIG.

PS-125DC POWER SUPPLY

Light weight switching regulator system power supply.

•Output voltage: 13.8 V DC

•Max. current drain: 25 A

CR-282HIGH-STABILITY CRYSTAL UNIT

Contains a temperature-compensating oven heater and crystal unit for frequency stability.

•Frequency stability: ±0.5 ppm (–10°C to +60°C; +14°F to +140°F)

FL-100CW NARROW FILTER (500 Hz/–6 dB) FL-101CW NARROW FILTER (250 Hz/–6 dB) FL-103SSB WIDE FILTER (2.8 kHz/–6 dB)

FL-223SSB NARROW FILTER (1.9 kHz/–6 dB) FL-232CW/RTTY NARROW FILTER (350 Hz/–6 dB) Two of the above 5 filters can be installed at one time. HM-103HAND MICROPHONE

Standard hand microphone. OPC-599ADAPTER CABLE

13-pin, ACC connector to 7-pin + 8-pin ACC connector.

OPC-742ACC 13-PIN CABLE

Required when using both the AT-180 and a 2 m linear amplifier.

MB-72CARRYING HANDLE Convenient when carrying the transceiver.

UT-102VOICE SYNTHESIZER UNIT UT-106DSP RECEIVE UNIT

65