Icom IC-706MKIIG Set Mode, General, DQuick set mode operation, DInitial set mode operation

7 SET MODE

■General

Set mode is used for programming infrequently changed values or conditions of functions. The IC- 706MKIIG has 2 separate set modes: quick set mode and initial set mode.

DQuick set mode operation

➀While power is ON, push [DISPLAY] for 2 sec.

•Quick set mode is selected and one of its items appears.

•Quick set mode items vary depending on the operating mode (SSB, FM, etc.) selected.

➁Push [MENU] one or more times to select the

desired item.

•[M-CH] or [Y]/[Z] can also be used.

➂Rotate the main dial to set the values or conditions for the selected item.

➃Repeat steps ➁ and ➂ to set other items.

➄To exit quick set mode, push [DISPLAY] momentar- ily.

DInitial set mode operation

➀Push [POWER] for 2 sec. to turn power OFF.

➁While pushing [LOCK] push [POWER] to turn power ON.

•Initial set mode is selected and one of its items appears.

➂Push [MENU] one or more times to select the desired item.

•[M-CH] or [Y]/[Z] can also be used.

➃Rotate the main dial to set the values or conditions for the selected item.

➄Repeat steps ➂ and ➃ to set other items.

➅To exit initial set mode, push [POWER] for 2 sec. to turn power OFF.

➆Push [POWER] to turn power ON again.

•The conditions selected in initial set mode are now effec- tive.

[POWER]									Main dial
									[Y]
[M-CH]									[Z]
					[MENU]			[DISPLAY]
[DISPLAY EXAMPLE: QUICK SET MODE]
			USB
									Value or
S1	3	5	7	9	20	40	60dB		condition
PO					5		10
Q1				RF POWER					Item

Item number

[POWER]	Main dial
	[Y]
[M-CH]	[Z]
[MENU]	[LOCK]

[DISPLAY EXAMPLE: INITIAL SET MODE]

Value or condition

1 MODE SELECT Item

Item number

47