Icom IC-706MKIIG, I706MKTMG Q4 CW PADDLE CW only, Q5 KEY SPEED CW only, Q6 CARRIER Frq SSB only

7 SET MODE

Q4 CW PADDLE (CW only)

This item adjusts the CW paddle type. Four selec-	CW
	The default is “n,” normal.
tions are available.

•n : normal (for electronic keyer use)

•r : reverse (for electronic keyer use)

• buG	: When using the electronic key, key down
	produces a “dash,” releasing the key auto-
	matically produces a “dot(s).”
• oFF	: Turns OFF the electronic keyer (for
	straight key use)
• ud	: For using the microphone’s [UP]/[DN]
	keys instead of the CW paddle.

Q5 ANTI VOX (SSB/AM/FM only)
This item adjusts the ANTI-VOX gain for the VOX	USB
(voice activated transmit) function.	The default is 5.
Q5 KEY SPEED (CW only)
This item adjusts the CW key speed. The key speed	CW
	The default is 20 wpm.
can be selected from 6 to 60 wpm.
Q6 CARRIER Frq (SSB only)
This item adjusts the carrier frequency (BFO frequen-	USB
	The default is 0 Hz.
cy), allowing you to change the audio characteristics.
Selectable values are –200 to +200 Hz in 10 Hz steps.

Q6 RATIO (CW only)

This item adjusts the CW key ratio (or weight). The ratio can be selected from 2.8 to 4.5.

CW

The default is 3.0.

Q6 RPTR TONE (FM only)

This item selects a subaudible tone for FM-T mode operation to access a repeater. There are 50 tones available from 67.0 Hz to 254.1 Hz (see table at right).

FM

			The default is 88.5 Hz.
• Available subaudible tones								Unit: Hz
67.0	79.9	94.8	110.9	131.8	156.7	171.3	186.2	203.5	229.1
69.3	82.5	97.4	114.8	136.5	159.8	173.8	189.9	206.5	233.6
71.9	85.4	100.0	118.8	141.3	162.2	177.3	192.8	210.7	241.8
74.4	88.5	103.5	123.0	146.2	165.5	179.9	196.6	218.1	250.3
77.0	91.5	107.2	127.3	151.4	167.9	183.5	199.5	225.7	254.1

Q7 TONE SQL (FM only)

This item adjusts sets a subaudible tone for tone squelch use. (the same subaudible tone frequencies as for repeater operation are available—see above).

FM

The default is 88.5 Hz.

49