SET MODE 7
Q8 RPTR-T SCN (repeater tone scan)
During repeater operation, you can detect the tone frequency necessary to open a repeater (see p. 30).
FM
The default is 88.5 Hz.
Q8 T-SQL SCN (tone squelch tone scan)
During tone squelch operation, you can detect the tone frequency necessary to communicate using tone squelch (see p. 31).
FM
The default is 88.5 Hz.
■Initial set mode items
1 MODE SELECT (all modes)
This item is available in all modes, and allows you to simplify operation by inhibiting the selection of unneeded operating modes during normal operation. For example if you are operating mobile and only plan on using FM and AM modes, use “MODE SELECT” to inhibit access to all other modes (SSB, CW, RTTY, WFM), thereby making selection of AM or FM quick and easy.
The default is on for all operating modes. To toggle an operating mode on or off, push (or push and hold) [MODE] one or more times until the desired mode is displayed, then rotate the main dial to set on or off.
2BEEP (confirmation beep)
A beep sounds each time a switch is pushed to con- firm it. This function can be turned OFF for silent operation.
Confirmation beep ON | Confirmation beep OFF |
(default) |
|
3BAND BEEP (band beep)
A beep sounds when an operating frequency enters or exits a transmit frequency range. This functions independent of the confirmation beep setting (above).
Band beep ON | Band beep OFF |
(default) |
|
4BACK LIGHT (display backlighting)
The function display backlighting can be set to high, low or OFF to suit ambient lighting.
Display backlighting set to high (default).
Display backlighting set to low.
5 KEY LIGHT (key/switch backlighting)
The key/switch backlighting can be set to high, low or
OFF to suit ambient lighting.
Display backlighting set to high (default).
Display backlighting set to low.
50
