Icom I706MKTMG, IC-706MKIIG 27A-TUNESTRT auto tuner start, 28PTT TUNE PTT tune function

SET MODE 7

27A-TUNE STRT (auto tuner start)

The optional AT-180 ANTENNA TUNER has an auto- matic start capability which starts tuning if the SWR is higher than 1.5–3.

When “oFF” is selected, the tuner remains OFF even when the SWR is poor (1.5–3).

When “on” is selected, automatic tune starts even when the tuner is turned OFF.

Auto tune function OFF	Auto tune function ON.
(default).

Note: Even when “on” is selected, automatic tune does not start for the 50 MHz band.

28PTT TUNE (PTT tune function)

When an optional AH-4 ANTENNA TUNER is connect- ed, tuning can be started automatically at the moment the PTT is pushed.

Tuning starts only when	Tuning starts when pushing [PTT]
[TUNER] is pushed (default).	on a new frequency.

29 9600 MODE (Data socket speed)

This is used to change the communications speed packet operation. The data socket can be set to 1200

or 9600 baud. Default is 9600 baud.

30VSEND SEL (ACC socket output)

“on”: VSEND is for 144/430 MHz; HSEND is for the HF/50 MHz

“U only”: VSEND is for 430 MHz; HSEND is for HF/50/144 MHz

“oFF”: VSEND is not used; HSEND is for all bands.

The default is VSEND is for the 144/430 MHz band; HSEND is for the HF/50 MHz band.

31SPEECH LANG (voice synthesizer language)

When the optional UT-102 VOICE SYNTHESIZER UNIT is installed, you can select between English and

Japanese as the language.	Voice synthesizer functions	Voice synthesizer functions
	in English (default).	in Japanese.

32SPEECH SPD (voice synthesizer speed)

When the optional UT-102 VOICE SYNTHESIZER UNIT is installed, you can select between faster or slower synthesizer output.

Voice synthesizer output	Voice synthesizer output
is faster (default).	is slower.

54