Icom I706MKTMG, IC-706MKIIG 12QUICK SPLIT quick split function, 13SPLIT LOCK split lock

SET MODE 7

12QUICK SPLIT (quick split function)

When this item is set to ON, pushing [SPL] for 2 sec. sets the undisplayed VFO frequency to the displayed VFO frequency plus the split offset or duplex offset, and activates split operation.

Quick split function ON	Quick split function OFF.
(default).

13SPLIT LOCK (split lock)

When this item is ON the main dial can be used to adjust the transmit frequency (XFC) even while the lock function is activated.

Split lock function OFF	Split lock function ON
(default)

14SPL OFFSET (split offset)

This item sets the offset (difference between transmit
and receive frequencies) for the quick split function.	Default is 0.100 MHz.
Note that this setting is not valid in FM/WFM modes.

15DUP HF (duplex offset)

This item sets the offset for the duplex function when operating on the HF bands.

Default is 0.100 MHz.

16DUP 50M (duplex offset)

This item sets the offset for the duplex function when operating on the 50 MHz band.

17DUP 144M (duplex offset)

This item sets the offset for the duplex function when operating on the 144 MHz band.

18DUP 430M (duplex offset)

This item sets the offset for the duplex function when operating on the 430 MHz band.

19 1TOUCH RPTR (one touch repeater)

Default is 0.500 MHz.

Default is 0.600 MHz.

Default is 5.000 MHz.

This item sets the offset direction when using the one-touch repeater function. +duplex or –duplex can be selected.

DUP	DUP
Duplex direction is set	Duplex direction is set to
to –duplex.	+duplex.

52