Icom IC-M503 instruction manual Call channel programming, Channel names

■Call channel programming

The call channel switch can be programmed to your most often-used channels in each channel group for quick recall.

qWhile pushing and holding [HI/LO], push [DIAL] one or

more times to select the desired channel group (Interna- tional, U.S.A., Holland, ATIS, DSC) to be programmed.

wPush and hold [CALL] for 3 sec. to enter the call channel programming condition.

• Channel number starts flashing.

INT

25W CALL TAG CALLING

eRotate the channel selector to select the desired channel.

INT

25W CALL

TAG DUP INTL

rPush [CALL] to program the displayed channel as the call channel.

•Push [DIAL] to cancel the programming.

•The channel number stops flashing.

BASIC OPERATION 3

■Channel names

Memory channels can be tagged with alphanumeric names of up to 10 characters each.

Capital letters, small letters, numerals, some symbols (! " # $ % & ' ( ) ✱ + , – .⁄ ) and spaces can be used.

qSelect the desired memory channel.

• Cancel dual watch, tri-watch or scan in advance.

wWhile pushing and holding [HI/LO], push [CALL] to edit the memory channel name.

• A cursor appears and blinks.

INT

25W TAG

äLEASURE

eSelect the desired character by rotating the channel selec- tor or by pushing [Y]/[Z] on the microphone.

• Push and hold [SCAN] or [DIAL] for cursor movement.

rPush [CALL] to input and set the name.

• The cursor disappears.

tRepeat steps q to r to program another memory channel name, if desired.

9