8 CONNECTIONS AND MAINTENANCE
■ Unpacking |
|
The following accessories are supplied: | Qty. |
q Mounting bracket | 1 |
w DC power cable | 1 |
e Microphone hanger | 1 |
r Microphone hanger cable* |
|
1 | |
t Mounting bracket knobs | 2 |
y Microphone hanger screws (3 ⋅ 16 mm) | 2 |
u Mounting screws (5 ⋅ 20 mm) | 2 |
i Flat washers (M5) | 2 |
o Spring washers (M5) | 2 |
* Depending on version. | |
■Antenna
A key element in the performance of any communication sys- tem is an antenna. Ask your dealer about antennas and the best places to mount them.
■Fuse replacement
Two fuses are installed in the supplied DC power cable. If a fuse blows or the transceiver stops functioning, track down the source of the problem, if possible, and replace the dam- aged fuse with a new, rated one.
t
■ Cleaning
If the transceiver becomes dusty or dirty, wipe it clean with a soft, dry cloth.
q |
| e | y | AVOID the use of solvents such as benzene or al- |
|
|
| ||
|
|
|
| cohol, as they may damage transceiver surfaces. |
|
|
| i |
|
w | r |
| o |
|
18
