➥In set mode, indicates the selected condition. (pgs. 14, 37)
r VOLUME INDICATOR (p. 33)
Appears while audio output level is adjusted.
t SQUELCH INDICATOR (p. 33)
Appears while noise squelch level is adjusted.
y CHANNEL NAME INDICATOR
➥Channel comment appears (and scrolls) if programmed. (pgs. 9, 38)
➥In set mode, indicates or scrolls the selected set mode item. (pgs. 14, 37)
u SCRAMBLER INDICATOR (pgs. 10, 35)
Appears when an optional voice scrambler is activated.
i SCAN INDICATOR (pgs. 13, 36)
➥“SCAN” appears during normal scan.
➥“P SCAN” appears during priority scan.
o PRIORITY CHANNEL INDICATOR
➥Indicates a priority channel during priority scan or
➥“IC” appears during intercom mode. (pgs. 17, 38)
!0DUAL/TRI WATCH INDICATOR (pgs. 11, 36)
“DUAL” appears during dualwatch; “TRI” during
!1LOW POWER INDICATOR (pgs. 8, 33)
HM-134 REMOTE-CONTROL MICROPHONE 12
Appears when low power is selected.
!2CALL CHANNEL INDICATOR (pgs. 6, 32) Appears when the call channel is selected.
!3DUPLEX INDICATOR (pgs. 6, 32)
Appears when a duplex channel is selected.
!4TAG CHANNEL INDICATOR (pgs. 13, 36) Appears when a tag channel is selected.
!5BUSY INDICATOR (pgs. 8, 33, 34)
Appears when receiving a signal or when the squelch opens.
!6TRANSMIT INDICATOR (pgs. 8, 33)
Appears while transmitting.
!7“WAIT” INDICATOR
“WAIT” appears in the
•In the above case, the connected
31
