T DIAL SWITCH DIAL, Y DUAL-WATCH/INTERCOM SWITCH DUALIC

➥Enter set mode when pushed and held while turning power ON. (pgs. 14, 37)

t DIAL SWITCH [DIAL]

➥Selects and toggles the regular channels when pushed momentarily. (pgs. 6, 7, 32)

➥While pushing and holding [H/L], push to select channel group. (pgs. 6, 7 and 32)

•The “ EUR” version has International channels only and this function is not available.

➥Push to start dualwatch or tri-watch. (pgs. 11, 36)

➥Push and hold for 1 sec. to activate the intercom func- tion. (pgs. 17, 38)

➥Push to stop dualwatch or tri-watch when either is acti- vated.

➥While pushing and holding the switch, you can call the IC-M503 in intercom mode. (pgs. 17, 38)

➥After pushing [SQL], [Y]/[Z] sets the squelch threshold level. (p. 33)

➥Push and hold [SQL•MONI] for 1 sec. to turn the monitor function ON. (p. 34)

➥While pushing and holding [H/L], push [SQL•MONI•L] to toggle the microphone key lock function ON or OFF. (p. 34)

•“ T ” appears while key lock function is in use.

•[PWR], [PTT], [VOL], [SQL] and [H/L] still function when the

HM-134 REMOTE-CONTROL MICROPHONE 12

microphone key lock function is turned ON.

➥Advances the cursor while in memory name program- ming condition. (pgs. 9, 38)

➥After pushing [VOL], [Y]/[Z] adjusts the audio level.

➥Push and hold [VOL•DIM] for 1 sec. to adjust the bright- ness of the LCD and switch backlight. (p. 34)

➥Moves the cursor backward while in memory name pro- gramming condition. (pgs. 9, 38)

➥When pushed, toggles high and low power. (pgs. 8, 33)

•Some channels are set to low power only.

➥While pushing and holding this switch, other switches perform secondary functions.

➥Toggles the all key lock function ON or OFF when pushed and held while turning power ON. (p. 34)

•“ T ” ﬂashes while the all key lock function is in use.

•Only [PWR] and [PTT] function when the all key lock function is in use.

➥Starts and stops normal or priority scan when tag chan- nels are programmed.

➥Push and hold [SCAN•TAG] for 1 sec. to set the dis- played channel as a tag (scanned) channel.

➥While pushing and holding [H/L], push and hold for 3 sec. to clear all tag channels.