ICP DAS USA 8430, 8KE8, 8KE4 #01S3C1+09.000, #01S3C1-05.000, Command, Description, Syntax, Example

#AASiCj
	#AASiCj(data)
Command
Description	Sets the analog voltage output module data from the specified slot and
	channel in the I-8000 unit. The data format is in engineering units only.
Syntax	#AASiCj(data)[CHK](cr)
	#	A delimiter character
	AA	A 2-character HEX module address for the
		specified I-8000 unit ,ranging from 01 to FFh
	Si	The specified slot number. i = 0 to 3(4 slots) or
		i = 0 to 7(8 slots)
	Cj	The specified channel number.
		i-87022 Î j = 0 to 1
		i-87024 Î j = 0 to 3
		i-87026 Î j = 0 to 3
		i-8024 Î j = 0 to 3
	(data)	A decimal value, always engineer unit
	[CHK]	A 2-character checksum
	(cr)	Carriage Return (0x0D) to denote the end of
		command
	Valid Command	> [chk](cr)
	Invalid Command	?AA[CHK](cr)
	Any syntax or communication error may receive no response.
	>	A delimiter for valid command
	?	A delimiter for invalid command
	AA	A 2-character HEX module address
	[CHK]	A 2-character of checksum
	(cr)	Carriage Return (0x0D) to denote the end of
		response
Example 1:	Command	#01S3C1+09.000
	Response	> (cr)
	Description	This example sends the positive value +9.000V to
		the Analog Data output Module in slot 3 and
		channel 1 of the I-8000 unit at address 01h. The
		response indicates the command is valid
Example 2:	Command	#01S3C1-05.000
	Response	> (cr)
	Description	This example sends the negative value -5.000V to
		the Analog Data output Module in slot 3 and
		channel 1 of the I-8000 unit at address 01h. The
		response indicates the command is valid

8430/8830/8KE4/8KE8 User’s manual, Jan 2005, Version 1.0, 8MS-002-10 ----- 74