ICP DAS USA 8KE8, 8KE4, 8430, 8830 #01S30042, #01S300AA55cr, Command, Description, Syntax, Example

# AASi00(data) For multiple channels DO output

Command		#AASi00(data)
Description		Sends the value to the digital output module for multiple channels output of
		a specified slot in the I-8000 unit
Syntax		#AASi00(data)[CHK](cr)
		$	A delimiter character
		AA	A 2-character HEX module address for the specified
			I-8000 unit ,ranging from 01 to FFh
		Si	The specified slot number. i = 0 to 3(4 slots) or
			i = 0 to 7(8 slots)
		00	00 that for multiple channels’ DO output
		(data)	A 2-character or 4-character HEX for digital output
			value.
			For output from all channels, the data	will	be
			2-character HEX for channel count is less than or
			equal to 8 bits, 4-character for channel count is 16 bits
			and greater than 8 bits. The data bit is corresponds to
			the output module channel.
		[CHK]	2-characters of Checksum
		(cr)	Carriage Return (0x0D) to denote the end of	the
			command
		Valid Command	>[chk](cr)
		Invalid Command	?AA[CHK](cr)
		Any syntax or communication error may receive no response.
		>	A delimiter for valid command
		?	A delimiter for invalid command
		[CHK]	A 2-character of checksum
		(cr)	Carriage Return (0x0D) to denote the end of	the
			response
Note		If any channel of	digital output module (*1) is configured for an analog
		input alarms then this command has no effect on the specified channel.
		The channel is always used for analog input alarms and can not be
		configured again unless it is disconnected.
		Refer to: Analog Input Alarm
		(*1) For digital output modules not support analog input alarm are :
		i-8041, i-87041, i-87042, i-8050
Example		Command	#01S30042
		Response	>(cr)
		Description	This example is for an 8-channel digital output
			module. The Digital output Module in slot 3 and
			channel 2 and channel 6 of the I-8000 unit at address
			01h will be set to ON. This example is only for output
			modules where the channel number is less than or
			equal to 8.
		Command	#01S300AA55(cr)
		Response	>(cr)
		Description
	8430/8830/8KE4/8KE8 User’s manual, Jan 2005, Version 1.0, 8MS-002-10			-----	76