Page 14

Cable Connection

1) Cut the zip e holding the power cord to the back of the monitor.
2) Connect the power cord to an AC outlet.
3) Press the monitor power switch to the ON posion.
WARNINGS:
• The main power must be turned on and o with the monitor power switch. Do not connect or disconnect the power cord or turn
the breaker on and o while the monitor power switch is on.
• When switching the monitor power switch or the POWER buon o and and back on, always wait for at least 5 seconds. For
complete electrical disconnecon, pull out the main plug.
Remote Control

Installing the Batteries

1) Turn the mouse over and remove the baery cover.
2) Insert two (2) AA baeries into the mouse by aligning the baeries' polarity and sliding them in place.
3) Replace the cover.

CAUTION:

• When disposing of baeries, be sure to do so in an environmentally proper manner.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• Ensure the baeries’ polarity (+/-) is aligned correctly.
• Do not mix new and old baeries together, or dierent types of baeries together.
• Replace the baeries as soon as they run out.
• Remove the baeries from the remote control when storing or when the remote will not be used for a prolonged period.
POWER SWITCH