Page 23
INF7020 Hardware Guide
NOTES:
• Up to 8 SCHEDULE items can be registered.
• Seng the SCHEDULE ashes the power LED alternately in red and orange in standby mode.
• A SCHEDULE that has a large number has precedence over that of a small number when schedules overlap.
• If D-SUB of INPUT SELECT on the OPTION menu is set to AV VIDEO, the input mode will switch to AV VIDEO (D-SUB)
regardless if set to D-SUB or VIDEO.
INPUT SELECT: Selects the input mode for the source types.
AUDIO SELECT: Selects the terminal used to input audio signals in each input mode.
INPUT SIGNAL: Select from the following opons when using a computer input.
480 LINES - Auto, 640 x 480 or 848 x 480.
768 LINES - Auto, 1024 x 768, 1280 x 768 or 1360 x 768.
1050 LINES - 1400 x 1050 or 1680 x 1050.
ZOOM2 SPECIAL SETTING - Used when black bands appear around the screen when using a laptop computer source with one
of the following resoluons: 1280 x 1024, 1280x960, 1400x1050, 1280x720 and 1024x768. Set Zoom 2 Special Seng to ON
and select ZOOM2 in SIZE SETTING. Use automac screen adjustment for 1400x1050 resoluons.
SCAN MODE: Sets the scan mode for the AV source signal.
MODE1 - Overscan display. Note: If the screen size is DOT BY DOT and MODE1 is selected, underscan is used for 1080i/p sig-
nals.
MODE2 - Underscan display.
MODE3 - Underscan display when the input signal is 1080i/p. Otherwise overscan the display.
POWER MANAGEMENT: Determines whether or not to switch modes from no signal ot the input signal standby mode.
COLOR SYSTEM: Select the color system of the AV equipment. Opons include: Auto, PAL, PAL-60, SECAM, NTSC3.58 and NTSC4.43.
When AUTO is selected, the color system is automacally set according to the input signal.
AUDIO OUTPUT: Sets the volume of sound output from the audio output terminals. When Variable 2 is chosen, sound will not be
output from the built-in speaker or the external speaker terminal.
VARIABLE1 - sound can be adjusted using the remote Volume buons.
VARIABLE2 - sound can be adjusted using the remote Volume buons.
FIXED - locks the sound level, so that it cannot be adjusted using the remote Volume buons.
AUDIO LEVEL: Selects the maximum audio input level of the audio input terminal.
SELF ADJUST: When ON, this funcon automacally syncronizes the PC source signal. ADJUSTING appears on the screen during the
adjustment. Adjustment is not possible in all cases, such as images with black edges. In this case, select OFF and manually adust the
image.
AUTO INPUT CHANGE: Specify whether to change inputs automacally. When ON is selected and no signal is present in the se-
lected input mode, AUTO INPUT CHANGE automacally changes the selected mode to another mode where a video signal is present.
When video signals exist in mulple input modes, the switching priority is PC D-SUB, PC HDMI, and AV HDMI.
TOUCH PANEL MODE: When the resoluon is 1920 x 1080, seng this to ON improves touch panel tracking. When two screens are
displayed, or when V-POS or V-SIZE is adjusted on the SCREEN menu, the screen may become distorted. In this case, set to OFF.