Page 25
INF7020 Hardware Guide
Function Menu
You can return the sengs to their factory-preset values and restrict operaons from the hidden Funcon menu.
To access the Funcon menu:
1) Hold the SIZE buon down unl “F” appears in the upper le corner of the screen.
2) While “F” appears, press up, right, down, and le arrow buons in that order.
3) The Funcon menu appears.
▲
▲▲▲▲▲▲ ▲
OFF
UNLOCKED
ON1
ON
LED
OFF
MONITOR
FUNCTION 1/1
ALL RESET
ADJUSTMENT LOCK
ADJUSTMENT LOCK TARGET
RS-232C
OSD DISPLAY
LED
TEMPERATUREALERT
STATUSALERT
POWER BUTTON
CONTROLLER INPUT
END…[MENU]
▲▲▲▲▲▲ ▲
ALL RESET: Resets the sengs to the factory default sengs. Press the right arrow buon, select ALL RESET, and then press the
MENU buon. Aer inializaon, turn the monitor power switch o and then back on.
ALL RESET1 - Resets all the sengs to the factory default sengs.
ALL RESET2 - Returns all sengs to the factory default sengs except for the following items: LAN SETUP, RS232C/LAN SELECT,
BAUD RATE, NETWORK, MAIL, SERVICE & SUPPORT, and SNMP.
ADJUSTMENT LOCK: Denes which buons on the remote control or monitor can be used.
OFF - Enables operaon.
ON 1 - Disables all operaons other than turning power on/o and FUNCTION.
ON 2 - Only the FUNCTION operaon is enabled. Disables all operaons other than FUNCTION (not even power on/o).
ADJUSTMENT LOCK TARGET: Denes whether the remote control or monitor can be used.
REMOTE CONTROL - Prohibits remote control operaon.
MONITOR BUTTONS - Prohibits monitor buon operaon.
BOTH - Prohibits remote control and monitor buon operaon.
RS232C: Species whether to allow RS232C control.
OSD DISPLAY: Denes which menus, modes, and messages are displayed. Note: The FUNCTION screen cannot be hidden.
ON 1 - Shows all menus, modes, and messages.
ON 2 - Hides messages automacally displayed by the display. Shows messages during operaon.
OFF - Hides all menus, modes, and messages.
LED: Species whether to light the power LED. OFF cannot be selected when STANDBY MODE is LOW POWER.
TEMPERATURE ALERT: Selects the nocaon method for an abnormal temperature.
OFF - Do not nofy about an abnormal temperature.
OSD & LED - When an abnormal temperature is detected, the power LED ashes red and green alternately and the screen
displays a message: TEMPERATURE.
LED - When an abnormal temperature is detected, the power LED ashes red and green alternately.
STATUS ALERT: Selects the nocaon method for a hardware error.
OFF - Do not nofy about the error.
OSD & LED - When a hardware error is detected, the power LED ashes red and the screen displays a message: STATUS [xxxx].
LED - When a hardware error is detected, the power LED ashes red.