Page 15
INF7020 Hardware Guide
Operating the Remote
To operate, point the remote at the monitor (not at the computer module). The range of opmum operaon is about 16.4’ (5m) at
an angle of approximately 10 degrees from the sensor.
10° 10°
10°
10°
16.4’
(5 m)
REMOTE CONTROL
• Press the remote’s Power On and O buons to turn the projector on and o.
• Press the remote’s MENU buon to open the projector’s menu system.
• Use the arrow buons to navigate, and the Enter buon to select funcons and adjust values in the menus.
• See "INF7020 Menu System" on page 18 for more informaon.
The remote also has the following funcons:
MUTE: Turns the sound on/o.
VOLUME +/-: Adjusts the volume up and down. Also acts as up and down arrows when the menu is acve.
BRIGHT +/-: Adjusts the brightness up and down. Also acts as le and right arrows when the menu is acve.
SIZE: Toggles between dierent screen sizes. Opons include Wide, Zoom 1, Zoom 2, Normal, and Dot by Dot.
WIDE - stretches the PC or 4:3 video image to completely ll the screen.
ZOOM 1 - enlarges a 4:3 video input to ll the enre screen. This is done without adjusng the aspect rao, so image edges
(such as closed caponing/subtles) may be cut o.
ZOOM 2 - can be used if Zoom 1 cuts o closed caponing subtles.
NORMAL - displays the enre PC or video input image on the screen without changing the aspect rao.
DOT BY DOT - displays the image in its nave format, matching pixel for pixel.
DISPLAY: Displays monitor informaon. Opons include Informaon1 and Informaon2.
MODE: Select a color mode. Opons include STD (standard), Vivid, sRGB (for PC input only).