Page 17
INF7020 Hardware Guide
Turning the INF7020 On/Off
The computer module, sound bar and monitor funcon independently. Each component must be controlled separately.
TO TURN THE INF7020 ON
1) Press the computer module POWER buon located on the back of the monitor.
2) Press the POWER buon located on the front of the monitor (or use the monitor's remote).
3) If installed, press the sound bar POWER buon on. The computer module, monitor and sound bar turn on.
NOTE: If the power is not turning on, check the power switch on the back of the monitor and verify that all power cords and power
supplies are properly connected and connected to AC.
TO PUT THE INF7020 MONITOR INTO STANDBY
1) Press the POWER buon on the front of the INF7020 (or use the monitor's remote).
2) If you want to put the computer module into standby mode, press the POWER buon located on the back of the monitor.
TO COMPLETELY POWER DOWN THE INF7020
1) Press the POWER buon on the front of the INF7020 (or use the monitor's remote).
2) Press the computer module POWER buon located on the back of the monitor.
3) Turn o the power switch on the back of the monitor and unplug the power cord from the power outlet.
NOTE: When toggling the power switch or the POWER buon o and on, wait at least 5 seconds.
POWER BUTTON
POWER LED
TOUCH PANEL LED
COMPUTER MODULE
POWER BUTTON