Page 13
INF7020 Hardware Guide
Setup
IMPORTANT: Before following these instrucons, your monitor must be wall mounted or aached to a stand or cart which meets
or exceeds the safety requirements for this monitor and follows all manufacturer safety precauons and instrucons.
Removing Orange Tape
Aer mounng the INF7020 monitor, carefully remove all orange tape.
Attaching the HD Video Conferencing Camera
1) Center the camera along the top edge of the monitor, aligning the camera bracket with the screw hole on the back of the moni-
tor.
2) Securely aach the camera bracket to the monitor using the provided screw.
3) Plug the USB cable into an available USB slot on the computer module. NOTE: It is not necessary to unwrap the cable. It has
been pre-measured.
4) Remove the plasc lm from the camera lens.
5) Manually lt and pan the camera (+/40°) as desired.
Attaching the Antennas
1) Aach the two antennas into the computer module on the back of the monitor by turning the antennas clockwise unl secure.
2) Adjust the angle of the antennas as needed to maximize wireless signal strength.
Attaching the Sound Bar
Refer to the Sound Bar user documentaon.