Page 28
The Power LED is ashing red and
green alternately. Temperature
is displayed in the corner of the
screen.
• When the internal temperature of the monitor rises excessively, the brightness of the
backlight decreases automacally in order to prevent high-temperature related problems.
When this occurs, “TEMPERATURE” is displayed on the screen and the Power LED ashes
red and green alternately. (When TEMPERATURE ALERT is set to OSD & LED. This varies
depending on the seng.)
• If the internal temperature rises further, the monitor automacally enters standby mode.
(The Power LED connues ashing red and green alternately.)
• Remove the cause of the excessive temperature rise.
• If the monitor enters standby mode due to a rise in temperature, to return to normal
display, turn the power switch o and then back on again. The monitor, however, will enter
standby mode again if the cause of the temperature rise is not eliminated. Check whether
the monitor is placed at a locaon where a quick rise in temperature is likely. Internal
temperature rises quickly if the vents on the monitor are blocked. Internal temperature
rises quickly if dust accumulates inside the monitor or around the vents. Remove dust if
possible.
The internal clock is not working. • The clock is maintained by the internal baery. The baery may be exhausted. Contact
InFocus Technical Support for assistance. Note: The esmated service life of the internal
baery is 5 years.
LED Status
Monitor Touch
Panel LED Status
Monitor Power
LED Status
Computer Mod-
ule Power buon
Descripon
Solid Green Solid Blue The monitor and computer module are powered on.
Solid Orange Flashing Red The monitor and computer module are in standby mode. Press the
POWER buon on the remote or monitor to turn it on.
Solie Green Solid Red The monitor is on, but the computer module is not. Press the com-
puter module Power buon.
Flashing Green The monitor is powered on and is waing for an acve source.
Flashing Red There is a problem with the monitor. Contact Technical Support.
Flashing Orange The POWER ON DELAY funcon is acve. The image will appear aer
a pre-determined number of seconds.
Flashing Red and
Green
The monitor is overheang. See the Troubleshoong Tip above.
Flashing Red and
Orange
The monitor is in standby mode and is operang per the SCHEDULE
parameters.
Solid Green Normal Operaon
Flashing Orange Inializing
Flashing Orange
and Green
Inializing
O O O The monitor and computer module are powered o. No power is
supplied.
For addional troubleshoong support, please contact:
InFocus Corporaon Technical Support
6am-5pm PST
877-388-8385
www.infocus.com/support