Page 22
Option Menu
DATE/TIME SETTING
DATE/TIME FORMAT
SCHEDULE
INPUT SELECT
AUDIO SELECT
INPUT SIGNAL
SCAN MODE
POWER MANAGEMENT
1/2
ON
PC D-SUB
OPTION
SCREEN
PICTURE
AUDIO
SETUP
OPTION
PIP/PbyP
OK···[MENU]MOVE OSD···[DISPLAY]
19 2 0 x 1 080V: 60 Hz H: 67.5 kHz
DATE/TIME SETTING: Set the date and me. Press the le and right arrow buons to select the date and me parameters and then
press the up and down arrow buons to change the values. Set the date in the following order: month, day and year. Set the me on
a 12-hour basis (factory default).
DATE/TIME FORMAT: Sets the date and me display format.
Date opons include: MM/DD/YYY, DD/MM/YYYY, and YYYY/MM/DD.
Time opons include: 12 and 24-hour me.
SCHEDULE: Turns the power on and o, and changes the screen brightness at specied mes.
-
:
– – – – – – – – – – – –– – – – –
SCHEDULE
No.
POWER DAY OF THE WEEK
TIME INPUT BRIGHT
– –
/
– –
/
– – – – – – –
– –
:
– –
:
– – – –
PC D-SUB
(1)
–
-
:
– – – – – – – – – – – –– – – – ––
-
:
– – – – – – – – – – – –– – – – ––
-
:
– – – – – – – – – – – –– – – – ––
-
:
– – – – – – – – – – – –– – – – ––
-
:
– – – – – – – – – – – –– – – – ––
-
:
– – – – – – – – – – – –– – – – ––
-
:
– – – – – – – – – – – –– – – – ––
(5)(2) (3) (4) (6)
OK···[MENU]
1920x1080 V: 60 Hz H: 67.5 kHz
(1) - "●" means the schedule if active. "○" means the schedule is not active.
(2) POWER - ON turns the monitor on at the specied me. OFF turns the monitor o at the specied me.
(3) DAY OF THE WEEK - Species the day of the week to execute the SCHEDULE. Opons include: 0: ONLY ONCE; 1: EVERY
WEEK, and 2: EVERY DAY.
(4) TIME - Species the me to execute the SCHEDULE.
(5) INPUT - Species the default source input at power up. When INPUT is not specied, the monitor defaults to the last used
source input.
(6) BRIGHT - Sets the brightness when changing the screen brightness at a specied me.

CAUTION:

• Do not switch o the main power aer seng the SCHEDULE.
• Specify the correct date and me. SCHEDULE does not funcon unless the date and me are specied.
• Check regularly that the set date and me are correct.
• When STANDBY MODE is LOW POWER, SCHEDULE cannot be set.
• When a temperature abnormality occurs and the backlight brightness is reduced, the brightness is not changed even
if a schedule set to BRIGHT is executed.