Page 19
INF7020 Hardware Guide
Picture Menu
AUTO
ANALOG GAIN
ANALOG OFFSET
BRIGHT
CONTRAST
BLACK LEVEL
TINT
COLORS
SHARPNESS
RGB INPUT RANGE
64
86
31
30
30
30
30
12
1/2
FULL
PC D-SUB
PICTURE
SCREEN
PICTURE
AUDIO
SETUP
OPTION
PIP/PbyP
OK···[MENU]MOVE OSD···[DISPLAY]
19 2 0 x 1 080V: 60 Hz H: 67.5 kHz
AUTO: Automacally adjusts the analog gain and analog oset sengs. Press the right arrow buon to acvate this funcon.
ANALOG GAIN: Adjusts the bright porons of the PC source signal.
ANALOG OFFSET: Adjusts the dark porons of the PC source signal.
BRIGHT: Adjusts the backlight brightness. (In PIP mode, the main PIP source is aected.)
CONTRAST: Adjusts the dierence between the bright and dark porons of the image.
BLACK LEVEL: Adjusts the enre brightness of the video signals.
TINT: Adjusts the green and magenta hues of the image. Selecng + changes the color towards green. Selecng changes the color
towards magenta.
COLORS: Adjusts the color intensity.
SHARPNESS: Adjusts the sharpness of the image.
RGB INPUT RANGE: Sets the RGB input signal range. When this funcon is set to Auto and HDMI is being used, the RGB input signal
is detected automacally. AUTO is the recommended seng. If AUTO is not working properly for your source (images appear with
washed out blacks and compressed gradients), manually set the the range.
ADVANCED:
FLESH TONE - Adjusts the hue control. NOTE: When this funcon is set to Low or High, the C.M.S.-Hue, -Saturaon and -Value
cannot be adjusted.
3D-NR - Reduces the noise of playback images on video. Seng a higher level reduces more noise, but may cause blurring on
the image.
MPEG-NR - Reduces noise caused by digital compression.
3D-Y/C - Specify whether to perform 3-dimensional Y/C separaon. If dot interference or cross-color is occuring in fast-moon
scenes, selecng OFF may improve the image quality.
C.M.S.-HUE - Adjusts the tone of the red (R), yellow (Y), green (G), cyan (C), blue (B) and magenta (M) colors.
C.M.S.-SATURATION - Adjusts the vividness of the red (R), yellow (Y), green (G), cyan (C), blue (B) and magenta (M) colors.
C.M.S.-VALUE - Adjusts the brightness of the red (R), yellow (Y), green (G), cyan (C), blue (B) and magenta (M) colors.
COLOR MODE: Changes the color mode on the screen. (In PIP mode, the main PIP image is aected.) When sRGB is selected, WHITE
BALANCE, PRESET, USER, COPY TO USER, and GAMMA cannot be adjusted. When VIVID is selected, GAMMA cannot be adjusted.
WHITE BALANCE: Changes the white balance of the image. (In PIP mode, the main PIP image is aected.) When THRU is selected,
BLACK LEVEL, CONTRAST, TINT, COLORS, RGB INPUT RANGE, GAMMA, and COPY TO USER cannot be set.
THRU - Displays the input signal level as is (for PC HDMI only).
PRESET - Selects the color temperature using PRESET.
USER - Used for adjusng R-/G-/B-CONTRAST and R-/G-/B-OFFSET respecvely.
PRESET: Selects the color temperature when the WHITE BALANCE is set to PRESET.