4
Follow these steps for installing chilled water tank with a cold only faucet.
WATER CONNECTION
A | With no filtration system: |
■ Install a | |
| onto the cold water supply line. |
To “Inlet” on front of | ■ Install dedicated water control valve |
chilled water tank | with 1/4" compression fitting. |
| |
| ■ Attach remaining end of the supplied |
| white 1/4" tube into the 1/4" |
| compression fitting and tighten. |
Property Damage: Join remaining tube |
|
to cold water supply only. Water supply valves |
|
must not prevent backward flow. |
|
A Brass Nut
Ferrule
Brass Inse
Property Damage: Join remaining tube
to cold water supply only. Water supply valves
must not prevent backwards flow.
With optional InSinkErator filtration system:
For filtration installation instructions, see installation guide packed with the system.
Install a
Install dedicated water control valve with 3/8" compression fitting.
Install brass nut, ferrule and tube insert at the end of the white 3/8" tube from filter.
Insert the white 3/8" tube into the 3/8" compression fitting and tighten.
5
FILL TANK & CONNECT POWER
A | ■ Turn on the cold water supply. |
| ■ Depress the faucet handle and |
| hold it until water flows from the |
| spout. |
| ■ Allow water to run for at least 60 |
| seconds after water begins to flow |
| from faucet. |
| Property Damage: Before plugging in |
| chilled water tank, check for leaks in all |
| water supply connections. |
B
Property Damage: A standard grounded outlet
is required under the sink. Do not use an
extension cord set with the chilled water tank.
■Check all connections to ensure they are tight and that there are no leaks.
■Plug in chilled water tank.
■Prior to drinking water from the chilled water tank, run the water for at least 5 minutes to flush lines.
Allow up to 60 minutes for
water to reach target temperature.
9
