Integra DTR-5.5 instruction manual First Time Setup—Continued, That completes the setup

DTR-6.5,5.5_En.book Page 40 Wednesday, July 28, 2004 9:07 AM

First Time Setup—Continued

3	Press [Enter].
	Enter
	Auto Speaker Setup
	------------------------
	Do not Unplug Setup Mic
	Wait a moment, Please.
	The automatic speaker setup starts.
	The test tone, which is somewhat loud,
	is output by each speaker in turn, mea-
	sured by the microphone, and the
	speaker settings set accordingly. The
	whole process takes about 90 seconds.
	Auto Speaker Setup
	------------------------
	Do not Unplug Setup Mic
	Left
	Center
	Right
	Surr Right
	SurrBack R
	SurrBack L
	Surr Left
	Subwoofer
	If any extraneous noise is picked up by
	the microphone, the automatic setup
	will not work correctly, so be careful.
4	When the Check Result menu
	appears, press [Enter].
	Enter
	Auto Speaker Setup
	------------------------
	Push Enter:Check Results
	<:Retry	>:Set
	The Setup Result menu appears.
	0.Auto Sp Setup Result
	------------------------
	1.Warning
	2.Speaker Config
	3.Distance
	4.Level

1Warning

2Number of speakers and their sizes

3Distance from each speaker to the listening position

4The optimum volume level for each speaker

5	Use the Up and Down [ ]/[ ]
	buttons to select the item that
Enter	you want to check, and then
	press [Enter].

Enter

Press the [Return] button to return to the previous menu.

0-1.Warning	*
------------------------
Not Connect
-:-:-:--:--:--:--:--
Too Near/Far Speaker
-:-:-:--:--:--:--:--

0-2.Speaker Config
------------------------
Subwoofer	:Yes
Front	:Large
Center	:Small
Surround	:Small
SurroundBack :Small
SurrBack ch	:2ch
Crossover	:100Hz

0-3.Distance
------------------------
Left	:	3.6m
Center	:	3.6m
Right	:	3.6m
Surr Right	:	2.1m
Surr Back R :		2.1m
Surr Back L :		2.1m
Surr Left	:	2.1m
Subwoofer	:	3.6m

0-4.Level

------------------------

Left	:	0dB
Center	:	0dB
Right	:	0dB
Surr Right	:	0dB
Surr Back R :		0dB
Surr Back L :		0dB
Surr Left	:	0dB
Subwoofer	:	0dB

(Menus vary depending on country.)

*When a speaker has a warning, its abbre- viation (e.g., L, R, and so on) appears instead of the “---” dashes.

If you want to adjust any of the settings manually, see “Speaker Setup” on page 46.

6	When you’ve checked the set-
	tings, press the [Return] button
	to return to the previous menu.
	Auto Speaker Setup
	------------------------
	Push Enter:Check Results
	<:Retry	>:Set
7	When you’ve finished the auto-
	matic setup, press the Right [ ]
	button.
	Enter
	That completes the setup.
	To run the automatic setup again,
	press the Left [	] button.

The automatic speaker setup starts again.

8	Disconnect the speaker setup
	microphone.
	To cancel the automatic setup while it’s
	in progress, disconnect the micro-
	phone.

40