Integra DTR-5.5 Setting Preferences, Advanced Setup—Continued, The setup menu closes

DTR-6.5,5.5_En.book Page 71 Wednesday, July 28, 2004 9:07 AM

Advanced Setup—Continued

4	Use the Up and Down [ ]/[	]
	buttons to select the signal for-
Enter	mat that you want to set, and
	then use the Left and Right [	]/

[ ] buttons to select a listening mode.

Only listening modes that can be used with each input signal format can be selected.

For “Surround” or “THX,” the listening mode specified on pages 66, 67 will be used.

The Last Valid option means that the listening mode selected last will be used.

a. Ana/PCM: With this setting, you can specify the listening mode to be used when an analog (CD, TV, LD, VHS, MD, turntable, radio, cassette, cable, satellite, etc) or PCM digital (CD, DVD, etc) audio signal is played. b. Dolby D: With this setting, you can specify the listening mode to be used when a Dolby Digital format digital audio signal is played (DVD, etc).

c. DTS: With this setting, you can spec- ify the listening mode to be used when a DTS format digital audio signal is played (DVD, LD, CD, etc).

d. D.F. 2ch: With this setting, you can specify the listening mode to be used when a 2-channel (2/0) digital audio signal (Dolby Digital, DTS) is played (DVD, etc).

e. D.F. Mono: With this setting, you can specify the listening mode to be used when a mono digital audio signal is played (DVD, etc).

f. Multiplex: With this setting, you can specify the listening mode to be used when a multiplex audio signal is played.

g. Multich: This setting is available only when “5-1. DVD/MULTCH” is selected. With this setting, you can specify the listening mode to be used when the DVD analog multichannel input is used.

5	When you’ve finished, press the
	[Setup] button.
	The setup menu closes.

Note:

•This procedure can also be performed on the AV receiver by using its [Setup] button, arrow buttons, and [Enter] button.

Setting Preferences

This section explains the items on the Preference menu.

1		Press the [Receiver] button fol-
	Receiver	lowed by the [Setup] button.

The main menu appears onscreen.

2		Use the Up and Down [	]/[		]
		buttons to select “6. Preference,”
	Enter	and then press [Enter].
		The Preference menu appears.
		Menu
		------------------------
		Basic Setup
		6.Preference		-
	Enter	1-----------------------.Initial Setup
		1.IntelliVolume
		2.Volume Setup
		Advanced Setup
		3.OSD Setup
		3.Surround Setup
		4.Remote Setup
		4.Audio Adjust
		5.Digital Format
		5.Listening Mode Preset
		6.12V Trigger A Setup
		6.Preference
		7.12V Trigger B Setup
		8.12V Trigger C Setup
3		Use the Up and Down [	]/[		]

buttons to select menu items,

Enter and then press [Enter].

Enter

4	Use the Up and Down [ ]/[	]
	buttons to select the settings,
Enter	and use the Left and Right [	]/

[ ] buttons to set them. The settings are explained below.

5	When you’ve finished, press the
	[Setup] button.
	The setup menu closes.

Note:

•This procedure can also be performed on the AV receiver by using its [Setup] button, arrow buttons, and [Enter] button.

71