Integra DTR-5.5 instruction manual Connecting Zone, Using Only Speakers in Zone

DTR-6.5,5.5_En.book Page 74 Wednesday, July 28, 2004 9:07 AM

Zone 2

Connecting Zone 2 Using Only Speakers in Zone 2

With the Zone 2 function, you can enjoy one input source in the main room and a different source in another room.

There are two connection methods: using a receiver/inte- grated amp in Zone 2 or using only a pair of speakers in Zone 2.

Using a Receiver/Integrated Amp in Zone 2

With this connection method, you can use 7.1 surround sound in the main room and play a different AV source in Zone 2. The volume for Zone 2 is set on the receiver/ integrated amp.

•Use an RCA audio cable to connect the AV receiver’s ZONE 2 OUT L/R jacks to an analog audio input on your receiver/integrated amp.

•DTR-6.5 only: Connect the AV receiver’s ZONE 2 OUT SUBWOOFER jack to the subwoofer in Zone 2.

•Connect the Zone 2 speakers to the speaker terminals on the receiver/integrated amp.

Main room

TV

AV receiver

(DTR-6.5 only)

		SUB
		WOOFER
Zone 2
		LINE INPUT
	IN	Subwoofer
		TV
R	L
		Receiver/
		integrated amp

The AV receiver’s ZONE 2 OUT jacks can also be used as pre outs, although, in this case, the volume cannot be controlled solely on the connected amplifier. See “Set- ting the Zone 2 Out” on page 76 for details.

With this connection method, you can use 5.1 surround sound in the main room and play a different AV source in Zone 2. The volume for Zone 2 is set on the AV receiver.

•Set the Powered Zone 2 setting to Activated (see page 75).

•Connect your Zone 2 speakers to the AV receiver’s ZONE 2 SPEAKERS terminals.

Main room

TV

AV receiver

Zone 2

LR

74