Integra DTR-5.5 Minimum Speaker Impedance not American models, Menus vary depending on country

DTR-6.5,5.5_En.book Page 44 Wednesday, July 28, 2004 9:07 AM

First Time Setup—Continued

Minimum Speaker Impedance (not American models)

This setting is not set automatically by the Automatic Speaker Setup function (see page 39).

If the impedance of any of the connected speakers is 4 ohms or more, but less than 6 ohms, set the Minimum Speaker Impedance to “4 ohms.”

Note:

Before you change this setting, turn down the volume.

2	Use the Up and Down [ ]/[ ]
	buttons to select “1. Initial
Enter	Setup,” and then press [Enter].
	The Initial Setup menu appears.

Enter

	On	Standby		T V
			I	Input
	V1	V 2	V 3
	1	2	3	+
	V4	Multi CH	DVD	TV CH
	4	5	6	-
	CD	Tape	Tuner
	7	8	9
	Phono			TV VOL
	+10	0	Clear
	--/---	Input Selector
		Macro
	1	2	3	Zone 2
1		Remote Mode
	Receiver	DVD	CD	MD/CDR
	Tape
	TV	VCR	Cable	SAT
	Dimmer			Sleep

3

Enter

Enter

Use the Up and Down []/[ ] buttons to select “3. Hardware Setup,” and then press [Enter].

The Hardware Setup menu appears.

Menu
------------------------
Basic Setup
1.Initial Setup	-
1-----------------------.Initial Setup

1.Digital Input
1-3.Hardware Setup
------------------------2.Component Video
Advanced Setup
3a..HardwarePowered Zone2Setup
3.Surround Setup
:Not Activated
4.Audio Adjust
b.Zone2 Out
5.Listening Mode Preset
6.Preference	:Fixed
c.Sp Impedance Minimum
	:6ohms
d.TV Format	:AUTO

2, 3	TV		enu			M
			pM			en
	Input	o					u
		T
	+							2–4
	CH
					Enter			VOL
	Disc
	-		E			e		1, 5
				xit
						id
	Prev					Gu
		R	etur				p
	CH				n	etu
						S
	Display							Muting
	Rec							Random
	Audio	Subtitle				Angle		Last Memory
	Surround		All ST			THX		Stereo
	Repeat		A-B			Search		Memory
	Pure A		Direct			DSP		DSP
	Test Tone	CH SEL				Level-		Level+
	Open/Close Video Off
						L Night		Re-EQ
			RC-585M

	(Menus vary depending on country.)
4	Use the Up and Down [ ]/[ ]
	buttons to select “b. Sp Imped-

ance Minimum,” and then use the

Enter

Left and Right []/[ ] buttons to select:

4 ohms: Select if the impedance of any connected speaker is 4 ohms or more, but less than 6 ohms.

6 ohms: Select if the impedances of all connected speakers are between 6 and 16 ohms.

5	Press the [Setup] button.
	The setup menu closes.

1

Receiver

Press the [Receiver] button fol- lowed by the [Setup] button.

The main menu appears onscreen.

Notes:

•This procedure can also be performed on the AV receiver by using its [Setup] button, arrow buttons, and [Enter] button.

44