Integra DTR-5.5 instruction manual Basic Operation—Continued, Multich

DTR-6.5,5.5_En.book Page 59 Wednesday, July 28, 2004 9:07 AM

Basic Operation—Continued

The following table lists all the listening modes and shows which modes can be selected for each input signal format.

	Analog,		Dolby D				DTS/DTS 96/24*2
Input signal format								1/0,		DTS-	Multich
	PCM*1	*/2	2/0	1/0,1+1	Other	*/2	2/0		Other
								1+1		ES
Source	CD, TV, LD,
	VHS, MD,
	turntable,		DVD, DTV, etc.				DVD, LD, CD, etc.				DVD
	radio,
Listening mode
	cassette,
	DTV, etc.
Pure Audio	❍	❍	❍	❍	❍	❍	❍	❍	❍	❍	❍
Direct	❍	❍	❍	❍	❍	❍	❍	❍	❍	❍	❍
Stereo	❍	❍	❍	❍	❍	❍	❍	❍	❍	❍	❍*3
Mono	❍	❍	❍	❍	❍	❍	❍	❍	❍	❍	❍*3
PLIIx Movie/Music/Game *4	❍		❍				❍
Neo:6 Cinema	❍		❍				❍
Neo:6 Music *5	❍		❍				❍
Dolby D		❍			❍
Dolby D EX *6		❍
Dolby D+PLIIx Movie *7		❍
Dolby D+PLIIx Music *6		❍
DTS, DTS 96/24						❍			❍	❍*8
DTS+Neo:6 *6						❍
DTS+Dolby EX *6						❍
DTS+PLIIx Movie *7, Music *6						❍
DTS-ES Discrete *6										Discrete
DTS-ES Matrix *6										Matrix
Multich											❍
Multich+Dolby EX *6											❍*3
Multich+PLIIx Movie *7, Music *6											❍*3
*9 PLIIx+THX Cinema *4	❍		❍				❍
*9 Neo:6+THX Cinema	❍
*9 THX Cinema		❍			❍	❍			❍	❍*8	❍*3
*9 THX SurrEX *6		❍				❍					❍*3
*9 PLIIx+THX Cinema *7		❍				❍					❍*3
*9 DTS+Neo:6+THX Cinema *6						❍
*9 DTS-ES+THX Cinema *6										❍
Mono Movie
Enhance
Orchestra	❍	❍	❍	❍	❍	❍	❍	❍	❍	❍ ❍*3
Unplugged
Studio-Mix
TV Logic
All Ch Stereo	❍	❍	❍	❍	❍	❍	❍	❍	❍	❍	❍*3
Full Mono	❍	❍	❍	❍	❍	❍	❍	❍	❍	❍	❍*3
Theater-Dimensional	❍	❍	❍	❍	❍	❍	❍	❍	❍	❍	❍*3

1.In the Pure Audio and Direct listening modes, PCM signals at 32 kHz, 44.1 kHz, and 48 kHz are processed at 64 kHz, 88.2 kHz, and 96 kHz respec- tively. 96 kHz signals are processed at 48 kHz for all listening modes other than Pure Audio, Direct, and Stereo.

2.In the Pure Audio, Direct, Stereo, and DTS 96/24 listening modes, signals are processed as DTS 96/24. Everything else processed as DTS.

3.DTR-6.5 only.

4.If the SurrBack parameter is set to “None,” or the Zone 2 speakers are being used, PLII is used.

5.Available only when Surround speakers are connected.

6.Cannot be selected if the SurrBack parameter is set to “None” or the Zone 2 speakers are being used.

7.Cannot select if the SurrBack ch setting is not set to “2ch,” or the Zone 2 speakers are being used.

8.If the SurrBack setting is set to “None,” or the Zone 2 speakers are being used, DTS is used.

9.DTR-6.5 only.

59