Integra DTR-5.6 Rear Panel, Getting to Know the AV Receiver—Continued, J K L, O P Q R S, T U V W

DTR-5.6.book Page 10 Thursday, September 22, 2005 5:07 PM

Getting to Know the AV Receiver—Continued

Rear Panel

6Only on the North American model

1 2 3 4 5

789 J K L M N

O P Q R S

AOPTICAL DIGITAL

These optical digital audio inputs are for connecting components with optical digital audio outputs, such as CD players and DVD players.

The optical digital audio output is for connecting a digital recorder with an optical digital input, such as a CD recorder.

BCOAXIAL DIGITAL

These coaxial digital audio inputs are for connect- ing components with coaxial digital audio outputs, such as CD players and DVD players.

C REMOTE CONTROL

This (Remote Interactive) jack can be con-

nected to the jack on another -capable Inte- gra component, for remote and system control.

To use , you must make an analog audio connec- tion (RCA) between the AV receiver and the other component, even if they are connected digitally.

DCOMPONENT VIDEO IN 1, 2, and 3

These RCA component video inputs are for con- necting components with component video outputs, such as DVD players.

ECOMPONENT VIDEO OUT

This RCA component video output is for connect- ing a TV or projector with a component video input.

FXM antenna (on North American model)

This jack is for connecting an XM digital antenna, sold separately.

T U V W

GAM ANTENNA

These push terminals are for connecting an AM antenna.

HMONITOR OUT

The S-Video or composite video jack should be connected to a video input on your TV or projector.

IFM ANTENNA

This jack is for connecting an FM antenna.

J12V TRIGGER OUT (A/B/C)

These outputs can be connected to the 12-volt trig- ger inputs on other components.

KIR IN A/B and OUT

A commercially available IR receiver can be con- nected to the IR IN A or B jack, allowing you to control the AV receiver while you’re in Zone 2, or control it when it’s out of sight, for example, installed in a cabinet.

A commercially available IR emitter can be con- nected to the IR OUT jack to pass IR (infrared) remote control signals along to other components.

LZONE 2 OUT L/R

The L/R jacks can be connected to a line input on an amplifier in Zone 2.

MRS232

This port is for connecting the AV receiver to home automation equipment and external controllers.

NAC INLET

This connector is for connecting the supplied power cord.

10