Controlling Other Components

DTR-5.6.book Page 79 Thursday, September 22, 2005 5:07 PM

You can control your other components, including those made by other manufacturers, with the remote controller. This section explains how to:

•Enter the remote control code for a component that you want to control (e.g., DVD, TV, VCR).

•Learn commands directly from another component’s remote controller (see page 82).

•Program the Macro buttons to perform a sequence of up to eight actions (see page 83).

Entering Remote Control Codes

To control another component, you must ﬁrst enter the appropriate remote control code to a Remote Mode but- ton. You’ll need to enter a code for each component that you want to control.

Remote

Standby		indicator

TV I

Number buttons

Receiver

Remote

Mode

1	Look up the appropriate remote
	Look up the appropriate remote
	control code in the separate
	Remote Control Codes list.
	The codes are organized by category.
	The Remote Mode buttons shown in the
	Remote Control Codes list may differ
	slightly to those on the actual remote
	controller. Operation is unaffected.

2	While holding down the Remote
	While holding down the Remote
	Mode button to which you want
	to enter the code, press the
	[Standby] button.
	The Remote indicator lights up.

3	Within 30 seconds, use the num-
	Within 30 seconds, use the num-
	ber buttons to enter the 4-digit
	remote control code.
	The Remote indicator ﬂashes twice.

4	Press the Remote Mode button
	Press the Remote Mode button
	again to select the remote con-
	troller mode, point the remote
	controller at the component, and
	check the operation.
	If the remote controller doesn’t work as
	expected, and several remote codes are
	listed, try each one in turn and use the
	one that works best.

Notes:

•Remote control codes cannot be entered for the [Receiver] and [HDD] Remote Mode buttons.

•The remote control codes provided are correct at the time of printing, but are subject to change.

•The HDD remote mode can only be used with the Onkyo DS-A1 Remote Interactive Dock at this time.

•The [DVD] and [CD] Remote Mode buttons are preprogrammed for use with Integra DVD players and CD players respectively.

*To control another manufacturer’s CD recorder or MD recorder, enter the appropriate control code to the [CD] Remote Mode button.

DTR-5.6 specifications

The Integra DTR-5.6 is a high-performance AV receiver that exemplifies the blend of cutting-edge technology and audiophile-grade quality. With a focus on delivering stellar sound performance and versatility, the DTR-5.6 achieves this through a combination of features that enhance both convenience and audio fidelity.

One of the standout features of the DTR-5.6 is its multichannel audio processing capability. Supporting Dolby TrueHD and DTS-HD Master Audio, this receiver can decode high-resolution audio formats that are standard in modern home theater systems. This ensures that users experience soundtracks as intended by their creators, with immersive clarity and depth. Additionally, it incorporates Audyssey MultEQ XT, a sophisticated room calibration technology. This feature analyzes the acoustics of your listening environment, automatically adjusting speaker settings to optimize sound quality based on the specific audio landscape of your room.

Connectivity is another strong point of the Integra DTR-5.6. It provides multiple HDMI inputs, supporting 1080p and 4K video pass-through. This allows users to connect various high-definition devices such as Blu-ray players, gaming consoles, and streaming devices without sacrificing video quality. The receiver also features built-in Wi-Fi and Ethernet connections, enabling seamless access to streaming services and internet radio. With support for services like Spotify, Pandora, and others, users can easily enjoy their favorite music without needing additional equipment.

The DTR-5.6 is designed with a robust multi-zone capability, allowing users to enjoy different audio content in different rooms simultaneously. This feature provides flexibility and convenience for larger homes. For audiophiles, the receiver is also equipped with high-current amplifiers that ensure dynamic sound reproduction and sufficient power output for driving demanding speakers.

For user convenience, the Integra DTR-5.6 comes with an intuitive on-screen interface and an easy-to-use remote control. The receiver’s sleek design and user-friendly layout make it a great addition to any entertainment setup. Furthermore, it supports various streaming protocols, including Apple AirPlay and Miracast, enhancing its versatility for modern multimedia needs.

In sum, the Integra DTR-5.6 is a powerhouse of an AV receiver, boasting advanced audio processing technologies, versatile connectivity options, and smart features that cater to both casual listeners and serious audiophiles alike. Its combination of performance, flexibility, and ease of use makes it an excellent choice for anyone looking to elevate their home entertainment experience.

Integra DTR-5.6 instruction manual Controlling Other Components, Entering Remote Control Codes

Models: DTR-5.6