Integra DTR-5.6 2 3 4 5, Subwoofer Mode, Speaker Distance, Advanced Setup—Continued, Setup closes

DTR-5.6.book Page 65 Thursday, September 22, 2005 5:07 PM

Advanced Setup—Continued

Subwoofer Mode

This setting is not set automatically by the Automatic Speaker Setup function (see page 37).

With this setting, you can boost bass output by feeding front left and right channel bass sounds to the subwoofer. This setting can only be made if the Subwoofer setting in step 4 is set to Yes, and the Front setting in step 5 is set to Large.

11 Use the Up and Down []/[ ] buttons to select “h. Subwoofer Mode,” and then use the Left and Right []/[ ] buttons to select: LFE only: The subwoofer only outputs the LFE channel.

Double Bass: In addition to LFE chan- nel sounds, the subwoofer outputs front left and right channel bass sounds.

12	Press the [Setup] button.
	Setup closes.

Note:

•These procedures can also be performed on the AV receiver by using its [Setup] button, arrow buttons, and [Enter] button.

Speaker Distance

These settings are set automatically by the Automatic Speaker Setup function (see page 37).

With these settings, you can specify the distance from each speaker to the listening position.

1	Press the [Receiver] Remote
	Mode button, followed by the
	[Setup] button.
	The main menu appears onscreen.

2

3

4

5

Use the Up and Down []/[ ] buttons to select “3. Speaker Setup,” and then press [Enter].

The Speaker Setup menu appears.

Use the Up and Down []/[ ] buttons to select “Speaker Dis- tance,” and then press [Enter].

The Speaker Distance menu appears.

3-3.Speaker Distance

------------------------

a.Unit	:feet
b.Front	:12.0ft
c.Center	:12.0ft
d.Surround R	: 7.0ft
e.SurrBack R	: 7.0ft
f.SurrBack L	: 7.0ft
g.Surround L	: 7.0ft
h.Subwoofer	:12.0ft

Note:

Speakers that you set to No or None on the Speaker Config menu (page 63) cannot be selected.

Use the Up and Down [ ]/[ ] buttons to select “a. Unit,” and then use the Left and Right

[]/[ ] buttons to select:

feet: Select if you want to enter distances in feet. Can be set from 1 to 30 feet in 0.5-foot steps.

meters: Select if you want to enter distances in meters. Can be set from 0.3 to 9 meters in 0.15-meter steps.

Use the Up and Down [ ]/[ ] buttons to select each speaker and then use the Left and Right []/[ ] buttons to specify the distance.

Specify the distance from the speaker to your listening position.

65