Integra DTR-5.6 Playing Your AV Components, 3 1 1 1 3, Basic AV Receiver Operation

DTR-5.6.book Page 44 Thursday, September 22, 2005 5:07 PM

Playing Your AV Components

Basic AV Receiver Operation

3

1

1

1

3

1	Remote
	controller

AV receiver

Use the AV receiver’s input selector buttons to select the input source.

To select the input source with the remote controller, press the [Receiver] Remote Mode button, and then use the Input Selector buttons.

On the remote controller, the [V1], [V2], [V3], and [V4] buttons select the Video 1, Video 2, Video 3, and Video 4 input sources respectively.

2	Start playback on the source component.
	To watch a DVD or other video source, on your TV, select the video input that’s con-
	nected to the AV receiver’s COMPONENT VIDEO OUT, or MONITOR OUT.
	On some DVD players, you may need to change the digital setting.

3		Remote
	AV receiver	controller
		VOL

To adjust the volume, use the Master Volume control or the remote con- troller’s [VOL] button.

Since the AV receiver is designed for home theaters, it has a wide volume range for precise adjustment. The volume can be set to –∞dB, –81 dB, –80 dB through +18 dB.

4	Select a listening mode and enjoy!
	See “Using the Listening Modes” on page 54.

44