6_Appendix_En Page 74 Thursday, September 22, 2005 5:17 PM

Zone 2—Continued

Powered Zone 2 Setting

If you’ve connected your Zone 2 speakers to this AV receiver, as explained in “Using Only Speakers in Zone 2” on page 73, you must set the Powered Zone 2 setting to Act (Activated) as explained here.

1

Press the [Receiver] Remote

 

 

Mode button, followed by the

 

[Setup] button.

 

The main menu appears onscreen.

2

Use the Up and Down [ ]/[ ]

buttons to select “8. Hardware Setup,” and then press [Enter]. The Hardware Setup menu appears.

3

Use the Up and Down [ ]/[ ]

 

buttons to select “Powered

 

Zone2,” and use the Left and

 

Right [ ]/[ ] buttons to select:

 

8.Hardware Setup

 

 

------------------------

 

a.PoweredZone2:NotAct

 

b.Zone2 Out :Fixed

 

c.TV Format

:Auto

 

d.AM Freq. Step: 9kHz

 

e.Remote ID

:1

Not Act: ZONE 2 SPEAKERS termi- nals not activated.

Act: ZONE 2 SPEAKERS terminals activated.

When Act is selected and Zone 2 is turned on, the speakers connected to the ZONE 2 SPEAKERS terminals will output sound. When Zone 2 is turned off, even if Act is selected, the surround back speakers will work as normal.

4

Press the [Setup] button.

 

 

Setup closes.

Zone 2 Out Setting

If you’ve connected your Zone 2 speakers to a power amp with no volume control in Zone 2, as explained in “Using Another Amp in Zone 2” on page 73, you must set the Zone 2 Out setting to Variable.

When set to Variable, the ZONE 2 OUT L/R jacks work like pre outs.

1

Press the [Receiver] Remote

 

 

Mode button, followed by the

 

[Setup] button.

 

The main menu appears onscreen.

2

Use the Up and Down [ ]/[ ]

buttons to select “8. Hardware Setup,” and then press [Enter]. The Hardware Setup menu appears.

3

Use the Up and Down [ ]/[

]

 

buttons to select “Zone 2 Out,”

 

and use the Left and Right [

]/

 

[ ] buttons to select:

 

 

8.Hardware Setup

 

 

 

------------------------

 

 

a.PoweredZone2:NotAct

 

 

b.Zone2 Out :Fixed

 

 

c.TV Format

:Auto

 

 

d.AM Freq. Step: 9kHz

 

 

e.Remote ID

:1

 

Fixed: The ZONE 2 OUT L/R jacks work as line outs, and the volume for Zone 2 is set on the receiver or inte- grated amp in Zone 2.

Variable: The ZONE 2 OUT L/R jacks work as pre outs, and the volume for Zone 2 is set on this AV receiver.

4

Press the [Setup] button.

 

 

Setup closes.

Note:

•These settings can also be changed on the AV receiver by using its [Setup] button, arrow buttons, and [Enter] button.

74

Page 73 Page 75
Page 74
Image 74
Integra DTR-5.6 instruction manual Powered Zone 2 Setting, Zone 2 Out Setting
Page 73 Page 75

DTR-5.6 specifications

The Integra DTR-5.6 is a high-performance AV receiver that exemplifies the blend of cutting-edge technology and audiophile-grade quality. With a focus on delivering stellar sound performance and versatility, the DTR-5.6 achieves this through a combination of features that enhance both convenience and audio fidelity.

One of the standout features of the DTR-5.6 is its multichannel audio processing capability. Supporting Dolby TrueHD and DTS-HD Master Audio, this receiver can decode high-resolution audio formats that are standard in modern home theater systems. This ensures that users experience soundtracks as intended by their creators, with immersive clarity and depth. Additionally, it incorporates Audyssey MultEQ XT, a sophisticated room calibration technology. This feature analyzes the acoustics of your listening environment, automatically adjusting speaker settings to optimize sound quality based on the specific audio landscape of your room.

Connectivity is another strong point of the Integra DTR-5.6. It provides multiple HDMI inputs, supporting 1080p and 4K video pass-through. This allows users to connect various high-definition devices such as Blu-ray players, gaming consoles, and streaming devices without sacrificing video quality. The receiver also features built-in Wi-Fi and Ethernet connections, enabling seamless access to streaming services and internet radio. With support for services like Spotify, Pandora, and others, users can easily enjoy their favorite music without needing additional equipment.

The DTR-5.6 is designed with a robust multi-zone capability, allowing users to enjoy different audio content in different rooms simultaneously. This feature provides flexibility and convenience for larger homes. For audiophiles, the receiver is also equipped with high-current amplifiers that ensure dynamic sound reproduction and sufficient power output for driving demanding speakers.

For user convenience, the Integra DTR-5.6 comes with an intuitive on-screen interface and an easy-to-use remote control. The receiver’s sleek design and user-friendly layout make it a great addition to any entertainment setup. Furthermore, it supports various streaming protocols, including Apple AirPlay and Miracast, enhancing its versatility for modern multimedia needs.

In sum, the Integra DTR-5.6 is a powerhouse of an AV receiver, boasting advanced audio processing technologies, versatile connectivity options, and smart features that cater to both casual listeners and serious audiophiles alike. Its combination of performance, flexibility, and ease of use makes it an excellent choice for anyone looking to elevate their home entertainment experience.
Top Page Image Contents