Integra DTR-5.6 Connecting a DVD player, Connecting Your Components—Continued, C B a

DTR-5.6.book Page 25 Thursday, September 22, 2005 5:07 PM

Connecting Your Components—Continued

Connecting a DVD player

Step 1: Video Connection

Choose a video connection that matches your DVD player ( A , B , or C ), and then make the connection. If you use connection A , you must connect the AV receiver to your TV with the same type of connection.

Step 2: Audio Connection

Choose an audio connection that matches your DVD player ( a , b , or c ), and then make the connection.

•With connection , you can listen to and record audio from a DVD and listen in Zone 2.

•To enjoy Dolby Digital and DTS, use connection or . (For Zone 2, use and , or and .)

•If your DVD player has main left and right outputs and multichannel left and right outputs, be sure to use the main left and right outputs for connection .

Connection		AV receiver	Signal flow	DVD player	Picture quality
	A	COMPONENT VIDEO IN 1	⇐	Component video output	Best
		DVD IN S	⇐	S-Video output	Better
	B
	C	DVD IN V	⇐	Composite video output	Standard
		DVD IN FRONT	⇐	Analog audio L/R output
	a
	b	DIGITAL COAXIAL IN 1	⇐	Digital coaxial output
		DIGITAL OPTICAL IN 3	⇐	Digital optical output
	c

b COAXIAL IN 1

DVD

IN

V

c OPTICAL

DVD IN

IN 3 S

A COMPONENT VIDEO	FRONT
IN 1	L
Y
	R
PB	IN

C

B

a

PR

				L		R
COAXIAL	OPTICAL	Y	PB	PR	AUDIO	S VIDEO	VIDEO
OUT	OUT	COMPONENT VIDEO OUT			OUT	OUT	OUT

Connect one
or the other	DVD player

To connect a DVD player or DVD-Audio/SACD-capable player with a multichannel analog audio output, see page 26.

25