Integra DTR-7.8 instruction manual Zone 2 and Zone, Connecting Zone, Hookup

Models: DTR-7.8

1 128
Download 128 pages 59.14 Kb
Page 111
Image 111
Zone 2 and Zone 3

Zone 2 and Zone 3

In addition to your main listening room, you can also enjoy playback in two other rooms, or as we call them, Zone 2 and Zone 3. And, you can select a different source for each room.

Connecting Zone 2

There are two ways you can connect Zone 2 speakers:

1.Connect them directly to the AV receiver.

2.Connect them to an amp in Zone 2.

Connecting Your Zone 2 Speakers Directly to the AV receiver

This setup allows 5.1-channel playback in your main room and 2-channel stereo playback in Zone 2, with a different source in each room. This is called Powered Zone 2, as the Zone 2 speakers are powered by the AV receiver. Note that when Powered Zone 2 is turned off, you can enjoy 7.1-channel playback in your main room.

Hookup

Connect your Zone 2 speakers to the AV receiver’s ZONE 2 L/R speaker terminals.

Main room

 

 

TV

 

AV receiver

ZONE2 R

ZONE2 L

Connecting Your Zone 2 Speakers to an Amp in Zone 2

This setup allows 7.1-channel playback in your main lis- tening room and 2-channel stereo playback in Zone 2, with a different source in each room.

Hookup

Use an RCA audio cable to connect the AV receiver’s ZONE 2 PRE OUT L/R jacks to an analog audio input on your Zone 2 amp.

Use an RCA audio cable to connect the AV receiver’s ZONE 2 PRE OUT SW jack to the line input on a powered subwoofer in Zone 2.

Connect your Zone 2 speakers to the speaker termi- nals on your Zone 2 amp.

Main room

TV

AV receiver

ZONE 2 ZONE 3

SW

L

R

PRE OUT

Zone 2

RL

You must set the Powered Zone 2 setting to Act (Activated) to use this setup (see page 113).

Note:

With this setup, the Zone 2 volume is controlled by the AV receiver.

Zone 2

 

 

 

LINE INPUT

 

 

 

IN

Powered

R

L

subwoofer

 

 

 

Receiver/

 

 

integrated amp

Note:

With the default settings, the Zone 2 volume must be set on the Zone 2 amp. If your Zone 2 amp has no vol- ume control, set the Zone 2 Out setting to Variable so that you can set the Zone 2 volume on the AV receiver (see page 114).

111

Page 111
Image 111
Integra DTR-7.8 Zone 2 and Zone, Connecting Zone, Connecting Your Zone 2 Speakers to an Amp in Zone, Hookup