Integra DTR-7.8 Zone 2 and Zone 3-Continued, Zone 2 Video Outputs, Connecting Zone, Hookup, Notes

Zone 2 and Zone 3—Continued

Zone 2 Video Outputs

The AV receiver features a composite video output and component video output for connection to a TV in Zone 2, so you can enjoy both audio and video in that zone.

Hookup

•Use a composite video cable to connect the AV receiver’s ZONE 2 OUT V jack to a composite video input on your Zone 2 TV.

•Alternatively, use a component video cable to connect the AV receiver’s COMPONENT VIDEO MONITOR OUT 2/ZONE 2 OUT jacks to a component video input on your Zone 2 TV.

Main room

TV

AV receiver

MONITOR OUT 2

/ZONE 2 OUTZONE 2 OUT

Zone 2

TV

•If you use the COMPONENT VIDEO MONITOR OUT 2/ZONE 2 OUT, you must set the Monitor Out2 setting to Zone 2 (see page 45).

Notes:

•The ZONE 2 OUT V jack outputs video from compo- nents connected to composite video inputs and S-Video inputs.

•The COMPONENT VIDEO MONITOR

OUT 2/ZONE 2 OUT outputs video from components connected to component video inputs.

Connecting Zone 3

Zone 3 speakers must be connected to an amp in Zone 3.

Connecting Your Zone 3 Speakers

You can enjoy 2-channel stereo playback in Zone 3 and a different source to those selected for your main room and Zone 2.

Hookup

•Use an RCA audio cable to connect the AV receiver’s ZONE 3 PRE OUT L/R jacks to an analog audio input on your Zone 3 amp.

•Use an RCA audio cable to connect the AV receiver’s ZONE 3 PRE OUT SW jack to the line input on a powered subwoofer in Zone 3.

•Connect your Zone 3 speakers to the speaker termi- nals on your Zone 3 amp.

Main room

TV

AV receiver

ZONE 3

SW

L

R

PRE OUT

Zone 3
	LINE INPUT
		IN
Powered	R	L
subwoofer
	Receiver/
	integrated amp

Note:

•With the default settings, the Zone 3 volume must be set on the Zone 3 amp. If your Zone 3 amp has no vol- ume control, set the Zone 3 Out setting to Variable so that you can set the Zone 3 volume on the AV receiver (see page 114).

112