Integra DTR-7.8 1 2 3, First Time Setup-Continued, Turn on the AV receiver and the connected TV

First Time Setup—Continued

1

2

3

Turn on the AV receiver and the connected TV.

On the TV, select the input to which the AV receiver is connected.

Place the setup microphone at the 1st measurement position, and connect it to the Setup Mic jack.

Auto Speaker Setup AUDYSSEY

Please place microphone at center

of listening area at ear height.

Push Enter : Next

Notes:

•Make sure the microphone is hori- zontal.

•If there’s an obstacle between the microphone and any speaker, the automatic setup will not work cor- rectly. Set up the room as you would when enjoying a DVD movie.

•Positioning the microphone close to where your ears would normally be will provide the best results. You can set the height of the microphone by using a tripod or level table.

Press [Enter].

Auto Speaker Setup AUDYSSEY

Do not unplug microphone.

Please keep quiet.

Now Measuring...

A test tone is output by each speaker in turn, as Audyssey MultEQ XT deter- mines which speakers are connected. This takes a few minutes.

Note:

•If any extraneous noise is picked up by the microphone, the automatic setup may not work correctly, so keep quiet.

4	The speaker detect results
	appear.
Enter	Auto Speaker Setup			AUDYSSEY
	-----SP Detect Result-----
	FL : Yes		FR : Yes
	SL : Yes		SR : Yes
	SBL : Yes	SBR : Yes
	C : No		SW : Yes
	Next
Enter	Retry
	Cancel
	“Yes” means that the speaker was
	detected. “No” means that no speaker
	was detected.
	If you agree with the results, use
	the Up and Down [		]/[	] but-
	tons to select Next, and then
	press [Enter].
	The options are:
	Next: Proceed to the next step.
	Retry: Return to step 2 and try again.
	Cancel: Cancel the automatic speaker
	setup.
5	The following screen appears.
	Auto Speaker Setup			AUDYSSEY
	Please place microphone at
	2nd Position at ear height.
	Push Enter : Next
	Place the setup microphone at
	the next position (see page 53),
	and then press [Enter].
	Audyssey MultEQ XT performs more
	measurements. This takes a few min-
	utes.
	Auto Speaker Setup			AUDYSSEY
	Do not unplug microphone.
	Please keep quiet.
	Now Measuring...
6	When prompted, place the setup
	microphone at the next position,
	and repeat step 5.

54