Integra DTR-7.8 instruction manual Selecting Audio Inputs Specifying the Digital Signal Format

Common Functions—Continued

Selecting Audio Inputs Specifying the Digital Signal Format

Rec	Playlist		Random
	Listening Mode
Stereo	Surround
Repeat	Audio	Subtitle	Play Mode
	Direct	THX	All ST
Test Tone	CH Sel	Level-	Level+
Open/Close	Video Off
Audio Sel	Audio Sel	L Night	Re-EQ
	VCR	DVD	HDD

RC-691M

If you connect a component to more than one audio input, such as a DVD player connected to analog, digital, multichannel, and HDMI inputs, you can use the [Audio Sel] button to select which audio input you want to use to listen to that component.

Press the [Audio Sel] button

Audio Sel repeatedly to select an audio

input: HDMI > Auto > Multich > Analog.

HDMI: Selects the assigned HDMI IN, and the HDMI indicator appears on the display. (The HDMI IN must already be assigned to the current input selector. See page 46.)

Auto: Selects the assigned COAX- IAL or OPTICAL DIGITAL IN, and the DIGITAL indica- tor appears on the display.

(The DIGITAL IN must already be assigned to the current input selector. See page 50.) If there is no digital signal, the analog input is used instead.

Multich:Selects the multichannel input, and the ANALOG indi- cator appears on the display. (The multichannel input must already be assigned to the current input selector. See page 52.)

Analog: Selects the analog input, and the ANALOG indicator appears on the display.

You can also use the [Audio Selector] button on the AV receiver.

1 2

Normally, the AV receiver detects the format of digital input signals automatically. However, if you experience either of the following issues when playing PCM or DTS sources, you can specify the signal format manually.

• If the beginnings of tracks from a PCM source are cut off, try the PCM setting.

• If noise is produced when fast forwarding or rewind- ing a DTS CD, try the DTS setting.

1	Press the [Audio Selector] button
	repeatedly to select Auto.

2	While “Auto” is shown on the dis-
	play, use the Tone Plus [+] and
	Minus [–] buttons to select:
	PCM: Only input signals in PCM
	format are output, and the
	PCM indicator lights up. The
	indicator flashes if the input
	signal is not PCM.
	DTS: Only input signals in DTS
	format are output, and the
	DTS indicator lights up. The
	indicator flashes if the input
	signal is not DTS.
	Auto (default): The format is detected
	automatically. If no digital
	input signal is present, the
	analog input is used instead.

81