Integra DTR-7.8 Selecting XM Radio Channels, Channel Search mode: select any channel, number

Listening to the Radio—Continued

2 To sign up, go to:

■Category Search Mode

http://activate.xmradio.com

Or call: 1-800-967-2346

For XM Canada, go to:

http://xmradio.ca

Or call: 1-877-438-9677

Notes:

1

Receiver

Enter

Press the [Receiver] Remote Mode button, and then press the [Enter] button repeatedly to select Category Search mode.

•RADIO ID cannot be selected in Category Search mode. You must select Channel Search mode (see right column).

•The following letters are not used in XM Satellite Radio IDs: I, O, S, F.

•XM Satellite Radio will transmit a special signal to your AV receiver to activate the full channel lineup. Activation normally takes between 10 and 15 minutes, but during busy peak periods, you may need to leave the AV receiver turned on for up to an hour.

2	Use the Left and Right [	]/[	]
	buttons to select a category, and
	use the Up and Down [	]/[	]
	Enter

buttons to select a channel in that category.

Selecting XM Radio Channels

There are three ways to select XM radio channels:

1.Channel Search mode: select any channel.

2.Category Search mode: select channels by cate- gory.

3.Direct tuning: enter channel number.

Note:

You can’t select Channel Search mode or Category

Search mode while the Tuning Arrow indicators are flashing, as tuning is in progress.

■Channel Search Mode

■Direct Tuning

You can select an XM radio channel directly by entering its number.

1		Press the [Receiver] Remote
	Receiver	Mode button, followed by the
		[D.TUN] button.
		The [Receiver] button flashes.

D.TUN

Clear

1

Receiver

Enter

Press the [Receiver] Remote Mode button, and then press the [ENTER] button repeatedly to select Channel Search mode.

2			Within 8 seconds, use the num-
			ber buttons to enter the channel
DVD	VCR/DVR	CBL/SAT	number.
1	2	3	For example, to select channel #20,
Game/TV	AUX 1	AUX 2
4	5	6	press 0, 2, 0, or 2, 0, [Enter].
Tape	Tuner	CD
7	8	9
		D.TUN	Note:
	0	Clear
	11	12	While the [Receiver] button is flashing,

you cannot select another input source with the remote controller.

2 Use the Up and Down [ ]/[ ] buttons to select a channel.

Channel number

Enter

Channel name

You can also use the Left and Right

[]/[ ] buttons to select a category.

67